2077401-1-M-Whirlpool-71001841-Door-Seal.jpg
2077401-1-S-Whirlpool-71001841-Door-Seal.jpg 2077401-2-S-Whirlpool-71001841-Door-Seal.jpg 2077401-3-S-Whirlpool-71001841-Door-Seal.jpg

Door Seal

PartSelect Number PS2077401

This oven door gasket prevents heat from escaping the oven cavity when in use.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

  • Compare At

    $46.75
  • You Save

    $7.79
  • Your Price

    $38.96
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 5.0 / 5.0, 3 reviews What's this?
1-3 of 3
 

9 of 10 people found this instruction helpful

Parts Used

  • Door Seal

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

Customercheryl from dolores CO

Oven door gasket was no longer flexible, but stiff

pulled out the old door gasket, it had little diamond-shaped clips, pulled out really easily, replaced with the new gasket. All the clips fit into the proper holes, stuffed the new ends where the old ones were. Perfect. less than 10 minutes. Thanks....

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 3 people found this instruction helpful

Parts Used

  • Door Seal

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerClark from Abbeville AL

Dried out seal

The repair did not happen as the seal was much larger (fat) than pictured. The one inch graph paper indicated the seal was 1/2 inch wide, which was the exact measurement of existing seal, but when it came it was closer to a full inch wide (fat)? This was my last hope as no one else has the right one either!

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 3 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsNutdriver, Screw drivers

CustomerFrieda from Scottsdale AZ

Faded electronic clock/worn oven seal

My husband would not relinquish the tools:(. It took him 15 min or less to change the electronic clock and maybe 2-3 min to change the seal. Niyyah, Scottsdale, AZ

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-3 of 3