| |
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerJAMES from McALESTER OK
Vent fan cloging up
old filter fell into from removing and cleaning,
removed cover pulled out filter ,replaced it with new one.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerColette from Annapolis MD
Needed to replace the grease filter!
Followed the directions. Piece of cake!!
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerMartyn from Middletown OH
The original grease filter was damaged in our dishwasher (it is quite fragile) and needed to be replaced.
1. Remove the exhaust vent cover, located in the center of the top of the range. It just lifts off.
2. Swivel the clamp 90 degrees to release the filter.
3. Remove the filter and throw it away
4. Place new filter in place and lock in place by rotating the swivel clamp back 90 degress.
5. Replace the exhaust vent cover
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerBrent from Rancho Santa Fe CA
Grease filter was torn and bent
I just lifted out old filter, and put in new one.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerWilliam from Goshen NY
Old filter couldn't be cleaned
This was a no-brainer: old filter out, new filter in. In addition to replacing an old, greasy filter, I found that the exhaust fan now draws cooking fumes much more efficiently. So why did I wait the 6 years since we moved into this house to do this???
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerSophie from Warrenton VA
Filter needed replacement. Old one was falling apart.
Removed old filter, dropped in the new one.
(This really was not a "repair")
|
0 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerDiane from Flower Mound TX
Old yucky filter
Thanks, have been looking for a replacement for this dinosaur filter forever. It is great!
|
0 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerCraig from Ashburn GA
Rotten filter for down draft vent
How I did the repair is no consequence. The service of easily finding the part on your site is GREAT! and the shipping time more than reasonable! Thanks!
|
19 of 685 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerRebecca from Sweeden KY
Two coil burners out on my four burner cook top
We just unplugged the cartriage and plugged in the new ones Took more time to get it out of the package than install. Cooking in least than 15 minutes ordering was easy and I called in dont trust internet with my credit card info yet Im over 60 you see But she was very helpful Wasnt sure about the grill screen because we had thrown away the old one. Clerk on phone helped me by measurements and elimination of all filters listed and it proved to be the correct one. Cant believe I waited so long before looking for parts. I was looking for a new cooktop that would have been 7 times the cost of these parts. Cook top looks like new
|
19 of 686 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerScott from Carrollton TX
Old jenn-air going going gone
My poor Jenn-air was about to kick the bucket, when I came across parts select. For under $ 500.00 I was able to get all new burners, knobs and grease jars. This and a few hours of scrubbing I am back to brand new stove. I had a repair man cme out and blessed my stove dead, microwave unsafe and about $1500.00 to repair the Jenn-air. Let just say for the money saved from Parts select, I got a real nice stove and microwave installed for the same amount quoted for the repair of the Jenn-air. Thanks Parts select for the great site and completive pricing.
|
36 of 1319 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
ToolsNutdriver, Screw drivers
CustomerSimon from Federalway WA
Burner swiths two, and radiant element cartridre has been problem in and out for month.
replaced switchs and cartridge, looks like bland new for spending 350 instead of new one for 1500. thank you for the parts i needed it.
|