2076846-1-S-Whirlpool-707929-Grease Filter
2076846-1-S-Whirlpool-707929-Grease Filter 2076846-2-S-Whirlpool-707929-Grease Filter 2076846-3-S-Whirlpool-707929-Grease Filter http://www.partselect.com/Schematics/Maytag/33624.gif

Grease Filter

PartSelect Number PS2076846

Manufacturer Part Number 707929
Manufactured by Whirlpool

This filter is intended for use with some downdraft cooktops and ranges. Sold individually.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Touchpad does not respond.
  • Compare At

    $16.78
  • You Save

    $2.80
  • Your Price

    $13.98
On Order
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.5 / 5.0, 41 reviews What's this?
 

145 of 287 people found this instruction helpful

Parts Used:
  • Grease Filter
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Roe from Raleigh, NC

Falling apart 20 year old grease filter for downdraft counter rangetop

Cleaned out the downdraft cove, inserted the new filter, and put old filter in garbage can. Laughing. Thanks. Wish you had a FAQ's hotline. I'd like to know if the radiant inserts fit the older coil-type models.

Help other customers find the most helpful instructions.

Were these instructions helpful?

145 of 290 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Donna from Charlotte, NC

Cooktop was looking old and worn though there was no working problem.

All of the "old" pieces were very easily removed and replaced with the new pieces. The update looks terrific and works just fine!

Help other customers find the most helpful instructions.

Were these instructions helpful?

5 of 6 people found this instruction helpful

Parts Used:
Level of Difficulty: Difficult
Time to do repair: More than 2 hours
Tools: Nutdriver, Screw drivers, Socket set, Wrench set
Customer: MICHAEL from LAKE GROVE, NY

Downdraft motor bearings shot

I first had to purchase the replacement motor which was quoted from a high of $236 to a low at graingers of$100. 00. The counterman at graingers removed the blower fan from the motor for me with a special long handled allen key. I then degreased and cleaned the blower fan. I had to cut off the screws on the motor and replace the 3 motor isolators and the urethane foam around the motor. I had to thread the 3 wires from the new motor through the bx cable from the old motor and reattach the fan to the motor. Anyone wanting more detailed informatioin may contact me at:mablume@optonline. Net

Help other customers find the most helpful instructions.

Were these instructions helpful?

5 of 8 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: John from Austin, TX

Range top was worn and dirty

opened shipping boxes, unpacked, unplugged old units, knobs and filter, repacked old units into boxes, plugged new units in, total time less than five minutes.
Looks and works like a new unit.

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 7 people found this instruction helpful

Parts Used:
Level of Difficulty: A Bit Difficult
Time to do repair: 1- 2 hours
Tools: Screw drivers
Customer: Albert from Snellville, GA

Connector for burner broke old and well used

Had to drill out screw for old connector bracket and also had to extend wires from controls this took most time. Once done with this used wire cutters to strip back insulation and then put the whole mess back together also used a larger wire nut to reconnect wires.

Help other customers find the most helpful instructions.

Were these instructions helpful?