2076166-1-S-Whirlpool-70111-108-Door Shelf Retainer Bar - Cut-to-Fit
2076166-1-S-Whirlpool-70111-108-Door Shelf Retainer Bar - Cut-to-Fit 2076166-2-S-Whirlpool-70111-108-Door Shelf Retainer Bar - Cut-to-Fit 2076166-3-S-Whirlpool-70111-108-Door Shelf Retainer Bar - Cut-to-Fit http://www.partselect.com/Schematics/Maytag/37616.gif

Door Shelf Retainer Bar - Cut-to-Fit

PartSelect Number PS2076166

This part may need to be cut-to-fit if it's too long for your appliance.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

  • Compare At

    $39.85
  • You Save

    $6.64
  • Your Price

    $33.21
On Order
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.4 / 5.0, 9 reviews What's this?
1-5 of 9
 

9 of 10 people found this instruction helpful

Parts Used:
  • Door Shelf Retainer Bar - Cut-to-Fit
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: BettyJo from Culpeper, VA

Door shelf retainer bars were broken

I received the door shelf bars. They were 26 inches. I used a hack saw and cut them to 22 inches. Put them on.
Perfect fit!!

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 3 people found this instruction helpful

Parts Used:
  • Door Shelf Retainer Bar - Cut-to-Fit
Level of Difficulty: A Bit Difficult
Time to do repair: 15 - 30 mins
Tools: Pliers
Customer: Versa J from Roseburg, OR

The previous one was broken

had to cut approximately 1/2 inch off. It was a bit to thick used the pliers to squeeze it to a thickness it would fit in the slots

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 5 people found this instruction helpful

Parts Used:
  • Door Shelf Retainer Bar - Cut-to-Fit
Level of Difficulty: Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Neill from Albuquerque, NM

Retainer bar was missing.

I had to cut the bar to the right length with a hacksaw. The most difficult part was getting on the plastic supports/pins on either end. I'm not sure a hacksaw is the best way to cut a retainer bar, but it worked.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 3 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Isidoro from Tiburon, CA

Replace missing parts

fast and easy. I got the right parts from the begining.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 3 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 30 - 60 mins
Tools:
Customer: francis from longmont, CO

Missing door shelf retainer

ordered new retained and fastners
cut to length per instructions
installed
repair completed
thanks for your service all parts were correct and deliver on time

wayne winkler

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-5 of 9