| |
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
ToolsSocket set
CustomerEduardo from Natalia TX
Cracked on the bottom
With a socket set wrench this is the second time it happen no problem
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyA Bit Difficult
Time to do repair:15 - 30 mins
ToolsNutdriver
CustomerDale from Kingwood TX
Ice maker leaking, ice cubes freezing toghether
viewed online video, followed steps, my amana had 3 screws instead of 1 screw. with plastic clips. removed l bracket screw, backed off other 2 screws, did not remove. slid ice maker up off 2 screws unplugged wire harness, followed the rest of steps on video. reversed steps for installation. one note, pay attention to how the wire harness is clocked it makes install easier because of access.
|
1 of 4 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:15 - 30 mins
ToolsNutdriver
CustomerMichael from Madison AL
Auger not dispensing ice, motor working properly
Firts checked the parts received werer correct for the repair and the correct part numbers ordered. Then removed the ice bucket with the auger in bottom. Emptied ice from original bucket auger assembly. Checked out the removeal of the face cover for the bucket auger and removed it from clips that held it in place. Checked the specifications of the old ice bucket compaired to the new parts. Installed the aurger assembly into the new ice bucket and removed the two screws from the old unit to use in secure the auger assembly in the new bucket. The only tool needed was a 1/4 inch nut driver. Installed the face place on the new ice bucket auger assembly and tested the fit in the freezer. Ran test of the auger assembly without ice to ck for any misinstlled parts. Refilled the ice bucket with ice and tested with ice to complete the repair.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
ToolsScrew drivers
CustomerGlenn from Burnet TX
Ice bucket was broken
REMOVED ICE BUCKET, REMOVED FRONT OF OLD ICE BUCKER, REMOVED ICE AUGER, STERALIZED NEW BUCKET AND REPLACED ALL PARTS. SLID NEW BUCKET IN REFRIG.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:15 - 30 mins
ToolsNutdriver, Screw drivers
CustomerAndrew from Bay City MI
The ice bucket had a cracked track
I had to pull the old ice bucket out, remove the front cover and the ice churner from the old bucket. The churner had to be installed onto the new ice bucket, then the front cover had to be snapped back on to the front of the ice bucket. Finally, the new bucket was slid into place. The whole process was relatively easy for a non-mechanical person like me, with the help of detailed instructions that came with the unit. The on-line video was also helpful. I would recommend this company to friends.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
ToolsScrew drivers, Socket set
CustomerRicky from Stockbridge GA
Ice tray was broken
Removed all parts in ice bucket and replaced end cap and bucket.It was very easy and is working great. Thanks for your help
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
ToolsNutdriver
CustomerDavid from Boise ID
Would not feed ice out of bucket
I removed the bucket and then took the feed screw out and replaced the end cap and reinstalled the feeder in the new bucket and put it back in place and it worked fine. This is not a hard job, you just have to pay attention to the dismantle so you can get every thing back together properly.
the breakdown and parts list was a big help.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:30 - 60 mins
ToolsPliers, Socket set
CustomerRaymond from Jackson MI
The ice storage bin broke and the ice driver sleeve broke. Needed replacement to make the ice dispenser work.
removed ice bin from the fridge. snaped off the front plate. Removed 4 screws. this led to freeing up the auger. removed it and put the auger into the new bin and replace the front parts. Put storage bin back into fridge. Done. Might want to keep some ice cubes in a separte container until done. Not hard.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyA Bit Difficult
Time to do repair:1- 2 hours
ToolsPliers, Screw drivers, Socket set
CustomerSCOTT from CHICAGO IL
Plastic bins broken
removed old parts. took ice crusher and auger out with socket set. replaced old bin with new and re-installed ice crusher. with meat pan removed roller wheels from old part and re-installed on new pan using pliers.
|
0 of 2 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:15 - 30 mins
ToolsNutdriver
CustomerBrad from Laredo TX
Ice maker leaking water causing ice build up
replaced ice maker and ice bucket with really no problems while watching repair video. had ice making within hours and is working wonderful.
|
0 of 2 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:Less than 15 mins
ToolsNutdriver
CustomerDebbie from Overland Park KS
Ice maker would jam up and not let ice out thru dispencer .
Super fast , I received my parts the very next day ,THANKS to PartSelect.com. GREAT JOB .
Pulled out 4 screws , pulled out the ice turn gear & crusher , replaced the helix end cap , put all these parts back in place , screwed 4 screws back in ice bucket , back in freezer and it works like new . It would of cost me $110.00 to have a repair company do this simple job .
|
19 of 618 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerCarol S. from Quincy IL
The auger was bent away from the cap and ice bucket was cracked
i had a serviceman look at it and he said it needed 6 parts, so i went to parts select and found the parts that i needed and i only needed 2 parts, the icemaker auger assembly and the ice bucket. It is working just like new again!!! thank you parts select, order on one day and recieved it the next day now thats what i call very fast service and shipping. If i should ever need parts for anything else parts select is the place i will go to. thank you again
carol
quincy il
|