2069178-1-S-Whirlpool-67005457-Defrost Heater Clip
2069178-1-S-Whirlpool-67005457-Defrost Heater Clip http://www.partselect.com/Schematics/Maytag/52534.gif

Defrost Heater Clip

PartSelect Number PS2069178

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Fridge too warm.
  • Compare At

    $7.91
  • You Save

    $1.32
  • Your Price

    $6.59
Special Order
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.2 / 5.0, 6 reviews What's this?
1-5 of 6
 

31 of 38 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 30 - 60 mins
Tools: Nutdriver, Screw drivers
Customer: Bryan from Maple Valley, WA

Freezer icing up and refer not cooling

Removed all parts and replaced defrost heater/thermostat and new clip then replaces Defrost board (new ones just snap in) and replaced all parts back and seems to be back to normal.
Thank you Parts Select

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 3 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver
Customer: John from Simsbury, CT

Defrost did not happen, expansion unit iced up, cooling was minimal.

Only had to remove 2 screws and slide the fan cover panel down and out, then lift out the coil cover panel. Then used a space heater to thaw the coils (block of ice) so that I could get to the defrost heating element (OK, so I was in a hurry. Could have just unplugged for a day an let it thaw on its own). Defrost heating element has just one connector (snaps in place), one thermo-switch (snaps onto coil) and one supporting retainer clip to disconnect. Literally under a minute at this point to remove the old one and replace it with the new one. I recommend two retainer clips to hold the new element in place, since the old element had sagged a lot with only one clip and that could have contributed to its demise. Reinstall the two panels, secure with the two screws, plug it back in, done deal. Works like new again.
I was very impressed with these parts - they were exact and obviously factory replacements. It doesn't get any easier than this.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 30 - 60 mins
Tools: Nutdriver, Pliers
Customer: Lester from Jacksonville, FL

Ice buildup on freezer floor

I followed the video on Part Select which covered everything in detail. The longest time was to defrost the coils. After removing the cover, part of the coils were iced up. The actual repair only took about 10 minutes. I had found my old heater element had bent so it was no longer heating the coils. I also replaced the Adaptive Defrost Timer since both work in conjunction with each other. Thank you Part Select for making life easier.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 6 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 30 - 60 mins
Tools: Nutdriver
Customer: Andrew from Cordova, AK

Automatic defrost was not functioning correctly, had to manually defrost every week

I watched your video, took notes, ordered the parts and installed them. Refrigerator works great. Might not have needed all three components, however I live in a remote part of Alaska so I ordered the works. Thinking that the other parts were also well used also and probably close to failure. THE REFRIGERATOR IS WORKING LIKE NEW. Your delivery time was astonishing. I order alot over the internet. The video was very well filmed and had all the right info, easy to understand. I would like to do business with you again. But you'll have to wait awhile for this frig to break again. Thanks alot.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 30 - 60 mins
Tools: Nutdriver
Customer: Hernan from Seguin, TX

Temperature in refrigerator & freezer above appropiate.

Unplug the refrigerator, open the back of the freezer, there were blocks of ice everywhere. I defrosted the ice using hair drier. Remove the heater and thermostat assembly and replace it with the new one.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-5 of 6