2068241-1-S-Whirlpool-67004373-Freezer Handle
2068241-1-S-Whirlpool-67004373-Freezer Handle 2068241-2-S-Whirlpool-67004373-Freezer Handle 2068241-3-S-Whirlpool-67004373-Freezer Handle

Freezer Handle

PartSelect Number PS2068241

Handle only. Mounting hardware sold separately.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

  • Compare At

    $68.83
  • You Save

    $11.47
  • Your Price

    $57.36
In Stock
Order within the next 1 hr and 30 mins and your part ships today!
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.3 / 5.0, 2 reviews What's this?
1-2 of 2
 

13 of 20 people found this instruction helpful

Parts Used

  • Freezer Handle

Level of DifficultyDifficult

Time to do repair:30 - 60 mins

Tools

CustomerLeslie from Shirley MA

Freezer handle bracket keeps loosening

Replacement of freezer door handle.
1. Removed freezer door handle. First I read the freezer door handle removal instructions in the Amana refrigerator user guide. Removing the handle requires inserting a plastic card at least 1.5 inches under the left end of the right side of the handle so it releases the butterfly clip latch on the freezer door. Next I pulled the right side of the handle to lift it away from the freezer door. Then still holding the handle away from the door, at the spot that is 1.5 inches from the inside of the right side of the handle, I held the plastic card vertically and slid one corner of it between the handle and the freezer door and worked the card down until it released the butterfly clip latch. Keeping the card at the same space under the handle so the latch was released, I then turned the card to the left until it was horizontal and was lifting the left end of the right door handle away from the freezer door. I then slid the handle across the card to the left until it cleared both door butterfly clip latches and it lifted off the door.
2. Installed freezer door handle. First I read the freezer door handle installation instructions in the Amana refrigerator user guide. The handle is curved on one edge and must be installed the curved side down. Correctly installed, the outside ends of the handle curve upward and the handle curve is down so it looks like a frowning mouth. Next holding the handle curved edge down, I turned it up so I could see the brackets and held it against the door. I lined up the handle brackets slightly to the left of the butterfly clips on the freezer door. Next I turned the handle with the brackets against the freezer door and slid it slightly to the right until the left side of the handle held onto the door butterfly clip by itself but was not latched. Then I lined up the right handle bracket with the right freezer door butterfly clip and carefully slid the whole handle to the right until I heard the left butterfly clip latch click. Next I slid the handle back slightly left once more and then slid it back to the right until I heard the right butterfly clip latch click.

Help other customers find the most helpful instructions.

Were these instructions helpful?

6 of 13 people found this instruction helpful

Parts Used

  • Freezer Handle

Level of DifficultyEasy

Time to do repair:Less than 15 mins

Tools

CustomerErnie from Portland OR

Handle broken on lower freezer (drawer)

Followed the instructions that came with the freezer. Took about 5 minutes. Just slid left side partially in first, than engaged right side of handle, and slid to the right until it clicked into place.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-2 of 2