2067612-1-S-Whirlpool-67003639-Door Closure
2067612-1-S-Whirlpool-67003639-Door Closure 2067612-2-S-Whirlpool-67003639-Door Closure

Door Closure

PartSelect Number PS2067612

Sold individually.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Door won’t open or close.
  • Compare At

    $22.36
  • You Save

    $3.73
  • Your Price

    $18.63
In Stock
Order within the next 12 hrs and your part ships today!
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.8 / 5.0, 2 reviews What's this?
1-2 of 2
 

4 of 5 people found this instruction helpful

Parts Used

  • Door Closure

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerCarlos from Streamwood IL

Door bushing

I bought a set of appliances used online and the fridge door did not align to the other door. I quickly noticed I had lost the lower bushing to the right door upon transportation so I did what any man would do...find a way to fix it! after checking out a few websites I ran accross Partselect and after seeing their "dummy proof" diagrams It was certain I couldn't mess this up considering the loads of bushings to choose from. The order was placed Monday morning and to my surprise I had a package the VERY NEXT DAY!! AMAZING delivery time and quality products. PartSelect is definately my appliace parts source from now on! Thank you!

Help other customers find the most helpful instructions.

Were these instructions helpful?

7 of 16 people found this instruction helpful

Parts Used

  • Door Closure

Level of DifficultyEasy

Time to do repair:Less than 15 mins

ToolsNutdriver

CustomerBill from Murphy NC

Right hand door would not auto close.

Removed the top door hinge cover.
Remover the four 12mm hex screws.
Lifted empty door off bottem hinge support.
Removed old door closure.
Put some silicon lub on the new closure and installed.
Reversed the removal steps.

But this did not fix the problem. Will have to remove the door and inspect the inside of the door's lower hinge assembly.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-2 of 2