2066823-1-M-Whirlpool-67002659-Crisper-Drawer.jpg
2066823-1-S-Whirlpool-67002659-Crisper-Drawer.jpg 2066823-2-S-Whirlpool-67002659-Crisper-Drawer.jpg 2066823-3-S-Whirlpool-67002659-Crisper-Drawer.jpg

Crisper Drawer

PartSelect Number PS2066823

NOTE: As per the manufacture the crisper drawer has been updated from the original. A new crisper cover will need to be purchased for the drawers to work.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Door won’t open or close.
  • Compare At

    $62.10
  • You Save

    $10.35
  • Your Price

    $51.75
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.7 / 5.0, 27 reviews What's this?
1-15 of 27
 

32 of 43 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

Tools

CustomerRoland from Alexandria VA

The crisper drawers had cracked runners

Crisper drawers:
1. Removed crisper drawers from refrigerator.
2. Removed drawer front decoration panels.
3. Unpacked, inspected and rinsed out new drawers.
4. Attached drawer front decoration panels.
5. Transfered vegetables and fruit from old drawers to new drawers.
6. Installed new drawers in refrigerator.
7. Closed refrigerator door.
8. Total time about 15 minutes, no tools required.

Ice & Water filter
1. Opened filter compartment cover
2. Removed old filter, drained into sink and placed in the trash.
3. Installed new filter
4. Bled the water line with ice water tap button (be aware when the air in the line exits the spigot, it create a lot of spray and you may need to cleanup the water that splash out of the bottom of the container used to capture the water during the bleeding process.)
5. Close the filter cover and refrigerator door.
6. Total time about 10 minutes and no tools required.

Help other customers find the most helpful instructions.

Were these instructions helpful?

11 of 12 people found this instruction helpful

Parts Used

  • Crisper Drawer

Level of DifficultyEasy

Time to do repair:Less than 15 mins

Tools

CustomerG. Kevin from Roanoke IN

Broken crisper pan

Since the crisper didn't come with a front, the old front needed to be removed from the broken cripser and attached to the new one. The easiest way to take off the front is to remove it from the bottom of the crisper. Once the pressure is released it comes off easy. Snap the front on the new crisper by starting with the top and snapping the bottom.

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 5 people found this instruction helpful

Parts Used

  • Crisper Drawer

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerEric from Stanardsville VA

Replace crisper drawer

The front had to be removed from old drawer a put on new one

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 5 people found this instruction helpful

Parts Used

  • Crisper Drawer

Level of DifficultyA Bit Difficult

Time to do repair:30 - 60 mins

Tools

CustomerJames from Staten Island NY

Plastic slide on crisper drawer broke

Ordered new drawer -- fast and easy to find the correct part on this site. I also felt that the price was very reasonable.
Except for one thing, it would have been simple to slide the new drawer in.
The original drawer has a white plastic "face" that is removable.
"Removable" is a relative term. It took my wife and I over 20 mins to very carefully remove the face without breaking. One person could not do it --- you need to hold the drawer firmly while another pries the face off carefully. Once off, it was able to be pushed on to the new drawer -- be firm.

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 5 people found this instruction helpful

Parts Used

  • Crisper Drawer

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerGerald from Campton NH

Guide rail on the crisper drawer had snapped off.

I ordered a new crisper drawer from PartSelect over the internet one morning at approximately 10:00am, and the product was delivered, non-express delivery, the next day at about 4:pm. The front coverplate of the old crisper came off easily, and snapped into place on the new drawer easily. The entire repair/replacement took less than 5 minutes.
Service from PartSelect, from locating, to ordering, to rceiving the part could not have been simpler or more efficient. A 5 star experience.Thank you.

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 5 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerMJ from Fallston MD

Broken crisper drawer / cracked pantry lid

Thanks to others who shared their story, I was prepared to "muscle" the front cover off the old crisper and snap it into place on the new crisper -- warning if you are good with puzzles and mechanics, this repair is a "snap"; Pantry Lid is very easy, push pin on left side, slide old lid out and push new lid in.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 3 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsNutdriver, Screw drivers

CustomerSusan from Oxford OH

Crisper drawers were cracked and broken; end cap broken peg

Replaced two original crisper drawers with 2 new drawers; replaced broken end cap which required the removal of a few bolts and screws. The replacement parts were identical matches--a huge relief. The interior of the fridge looks like new. This follows upon not being able to get the parts directly from the manufacturer.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 4 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerHeather from Columbus OH

I had some cracked drawers and shelves that I wanted to replace

I simply replaced the shelves and drawers

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 4 people found this instruction helpful

Parts Used

Level of DifficultyA Bit Difficult

Time to do repair:30 - 60 mins

ToolsSocket set

CustomerDavid from Concord MA

Runner on crisper broke and hinge on deli cooler lid broke

The crisper only required me to remove the trim from the broken crisper and replace it on the new. The hinge on the deli cooler lid was more complicated. I had to take all the bottom drawers and shelves out, and then, using a socket set, remove several screws that held the old unit in. Then, perhaps most complicated of all, I had to figure out how to remove the temperature setting from the broken piece and replace it on the new piece. Once that was done, it was just a matter of screwing the piece back to the side of the fridge.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

  • Crisper Drawer

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

Customerellen from Palos Verdes Estates CA

Broken drawer

I simply replaced the drawer with my existing front. I received my order almost next day. I was surprised on their speed, loved it!!

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

  • Crisper Drawer

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerMichael from Witts Springs AR

Plastic runners cracked - need to replace bins

No probelm what so ever. Take off from bottom first. Took less than 5 minutes for two. Plastic runners should have been stronger as it seems others have the same probelm. Parts ordered on Friday, deivered on Wednesday.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

  • Crisper Drawer

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerKimberly from Norco CA

Broken guide on crisper drawer

I have to say this was the smoothest repair ever! It was easy to find on the site, ordering was easy, part came, snapped off, snapped on new drawer, FINISHED! Thank you!

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerTim from Groveland MA

Broken plastic drawers

I'd been looking a broken plastic for 3 years. Googled Partselect on a whim and one week later a new drawer and lid arrived at my door. 10 minutes later the refridgerator was like new again.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

  • Crisper Drawer

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerCraig from Minneapolis MN

Broken

This has nothing to do with the repair - But with the customer service. I ordered and received a crisper in the mail and it had a crack in it. When I called the customer service # they helped me quickly and explained exactly how the credit/re-ship would happen. I received my new crisper in just a couple of days. Thank you!

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 3 people found this instruction helpful

Parts Used

  • Crisper Drawer

Level of DifficultyEasy

Time to do repair:Less than 15 mins

Tools

CustomerSimon from Bronx NY

Crisper was broken by pure negligence

1 take off broken crisper
2 remove front mask from broken crisper. You need a little bit of brain to figure it out how to...
3 Apply front mask to a new crisper. Once you took it out, you know how to install it . Be careful, do not break down mask or crisper, do not apply excessive force, think twice.
4. The most 'difficult' step - set the thing back in frige

Do not forget to remind your wife how stupid and negigent she is and how good you are

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-15 of 27