10 of 20 people found this instruction helpful
- Ice Dispenser Engagement Yoke
Level of DifficultyReally Easy
Time to do repair:Less than 15 mins
ToolsScrew drivers, Wrench set
CustomerSteven from Crossville, TN
The threads on the yoke shaft stripped.
I had to cut off the old yoke since the threads had stripped and it would not come off. Once I did that all I had to do was to remove 4 screws on the auger motor and replace it with the new auger motor. Then I put the yoke on the new auger motor shaft and then put the unit back in the freezer. Work time was less than 15 minutes with no problems.