Quick Question!

Have you ever purchased from PartSelect.com before?

2062512-2-S-Whirlpool-63001430-Door Handle Kit
2062512-2-S-Whirlpool-63001430-Door Handle Kit 2062512-1-S-Whirlpool-63001430-Door Handle Kit 2062512-3-S-Whirlpool-63001430-Door Handle Kit http://www.partselect.com/Schematics/Maytag/57738.gif

Door Handle Kit

PartSelect Number PS2062512

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

Compare At

$58.42

You Save

$9.74

Your Price

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 5.0 / 5.0, 3 reviews What's this?
1-3 of 3
 

2 of 5 people found this instruction helpful

Parts Used:
  • Door Handle Kit
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Thomas from Garden Grove, CA

Handle broke at top attachment point of door. Plastci was cracked.

Unscrewed the two mounting screws, selected the proper handle (two were provided). Re-attached handle. The task took 2 minutes.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • Door Handle Kit
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Jeannine from Miami, FL

Broken handle

Fit lower screw(from Fridge)into upper slot on pointed end of new handle, then lined up the holes on the top of the fridge door....Put in the screws & tightened(not too tight) . All done

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • Door Handle Kit
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Clinton from Catonsville, MD

Handle broke into 2 pieces

Removed broken parts, one with screwdriver, other by releasing from post. Had to reset post with screwdriver so top of handle would sit flush with top of door. Because the post screw was not set properly the first time, undue stress was caused at the top of the handle, where the break occurred.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-3 of 3