Quick Question!

Have you ever purchased from PartSelect.com before?

2062154-1-S-Whirlpool-63001057-Evaporator Motor
2062154-1-S-Whirlpool-63001057-Evaporator Motor 2062154-2-S-Whirlpool-63001057-Evaporator Motor 2062154-3-S-Whirlpool-63001057-Evaporator Motor http://www.partselect.com/Schematics/Maytag/57737.gif

Evaporator Motor

PartSelect Number PS2062154

This evaporator fan motor is located in the back of the freezer, and circulates air over the refrigerator coils. These coils will convert the heat into cool air, which is then circulated.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, KENMORE®, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Fridge too warm.
  • Noisy.
  • Freezer section too warm.

Compare At


You Save


Your Price

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 2.7 / 5.0, 2 reviews What's this?
1-2 of 2

23 of 30 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 1- 2 hours
Tools: Screw drivers
Customer: Walter from Mountain View, AR

Spinning type of rattle, refrig not staying cold, but freezer cold

The center hub of fan blade had cracked and had slipped off of fan motor shaft. I replaced fan and motor by pulling the shelf from freezer, removing 4 screws holding freezer back panel, tipped panel out and removed/replaced fan. Reassembled and it worked fine.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

14 of 21 people found this instruction helpful

Parts Used:
  • Evaporator Motor
Level of Difficulty: A Bit Difficult
Time to do repair: 30 - 60 mins
Tools: Nutdriver, Screw drivers
Customer: marci from mandeville, LA

Refrigerator wouldn't cool

I noted that the fan wouldn't run so I remove the trim so I could check the power. Once I saw there was power but the fan wouldn't run I was convince it needed rreplacement. To get the fan loose I had to remove the wiring and remove several screws. I then had to remove the fan blade with the needle nose pliers. I just reversed the order of things to replace the fan motor and put the refrigerator back together.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-2 of 2