2062095-1-S-Whirlpool-63-6766-Natural Gas to Liquid Propane Gas Conversion Kit
2062095-1-S-Whirlpool-63-6766-Natural Gas to Liquid Propane Gas Conversion Kit 2062095-2-S-Whirlpool-63-6766-Natural Gas to Liquid Propane Gas Conversion Kit 2062095-3-S-Whirlpool-63-6766-Natural Gas to Liquid Propane Gas Conversion Kit

Natural Gas to Liquid Propane Gas Conversion Kit

PartSelect Number PS2062095

If you want to convert back to Natural Gas from LP, you have to retain all the old parts. If not, the entire valve may have to be replaced to reconnect to natural gas.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

  • Compare At

    $32.78
  • You Save

    $5.46
  • Your Price

    $27.32
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 2.4 / 5.0, 2 reviews What's this?
1-2 of 2
 

7 of 10 people found this instruction helpful

Parts Used

  • Natural Gas to Liquid Propane Gas Conversion Kit

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers, Wrench(Adjustable)

CustomerROBERT from HOUSTON TX

Mother-in-law's dryer quit heating. Her's was lpg, replacment was ng

First, I inserted a screwdriver between the front panel and the top and popped the top loose. Next, there is a screw close to the top of the front panel on each side. Remove these. Next I unplugged the light switch from the front panel and removed the panel. Next, unscrew the gas line from the burner assy. and remove the screw holding the burner assy. to the frame. CAREFULLY, remove the burner assy. taking care not to break the ceramic igniter. Remove the assembly and unscrew the brass screw on the right side of the burner. Replace the screw with the new assembly furnished with the conversion kit. Remove the tube that directs the gas to the ducting. Unscrew the orifice fitting and replace with the new fittings furnished with the kit. Reinstall the tube and CAREFULLY return the burner assembly to the dryer. Screw the assy to the frame and re-connect the gas line. Replace the front panel, 2 screws, and snap the top back down onto the front panel, taking care to align the two guide pins. Connect the gas line to the dryer and install the ducting. Plug it in and test for leaks.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 4 people found this instruction helpful

Parts Used

  • Natural Gas to Liquid Propane Gas Conversion Kit

Level of DifficultyA Bit Difficult

Time to do repair:More than 2 hours

Tools

CustomerMaria from Delaware OH

I ordered part in anticipation of delivery of new dryer.

I asked a plumber to connect my new dryer. It came from the factory ready for natural gas and he needed the part to make it work with propane. My suggestion, ask a Whirlpool certified repairman. The plumber could not do the job and I had to ask a certified repairman out to do the job.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-2 of 2