Heating Element Kit - Red Dot 61927
Fits your LE4427W!
★★★★★
★★★★★
Rated by 12 customers
Really Easy
15 - 30 mins
Ratings submitted by customers like you who bought this part.
$
102.15
On Order
Get FREE EconoShip on orders over $100! T&C apply
Fits your LE4427W!
PartSelect Number PS2061575
Manufacturer Part Number 61927
Manufactured by
Whirlpool
Product Description
Heating Element Kit - Red Dot Specifications
This 240 volt heating element is used for electric clothes dryers. Included with this element is a fuse kit consisting of a thermal fuse, a high limit thermostat, two wire leads, and four mounting screws.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Speed Queen Dryer Heating Element Kit - Red Dot
Back to Top
Troubleshooting
This part works with the following products:
Dryer.
This part works with the following products:
Speed Queen, Amana, Maytag.
Part# 61927 replaces these:
AP4072871, 1914, 56047, 56179, 61195, R0610020, R0610022, R0610067
Customer Reviews
Average Rating:
2 Reviews
★★★★★
★★★★★
5.0
Filter By Rating:
-
5 Stars
-
4 Stars
-
3 Stars
-
2 Stars
-
1 Star
Sort by:
- < Prev
- 1
- Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Jose P - October 7, 2021
Verified Purchase
Great part
I am very satisfied with all the parts that I have got, they work great.
★★★★★
★★★★★
DON B - April 17, 2018
Verified Purchase
Easy to install and a perfect match to the original
The part fit and functioned perfectly. I ordered it on Monday and it was here the next day. Can’t beat that for service. Heater came as a kit with all the necessary hardware and wiring (if needed).
- < Prev
- 1
- Next >
Back to Top
Customer Repair Stories
Average Repair Rating: 4.1 / 5.0, 12 reviews.
What's this?
Sort by:
- < Prev
- 1
- 2
- Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
dryer not heating
Well first of all you get to the back of the dryer from the FRONT.. after lower panel was removed location of the heating element was right in front of you. Two 7/16 sheet metal screws hold the heating element in place very easy to remove.. upon removal you will have plenty of room to pull element out and switch out the wires you need to
... Read more
do.. Upon examination I think my trouble was a high limit fuse that burned out, so I propably did'nt need to buy the whole element ( you might want to check that first it is the ceramic one ) cleaned everything out and dryer is as good as new Good luck
Read less
-
Ron from Mellen, WI
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Screw drivers
2 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The dryer wouldn't dry cloths.
Simple,I unplugged the dryer and took off the panel located below the dryer door. To do that unscrewed 2 small screws on the underside of the panel. Once that was off I used a flashlight to locate the heating element which was in the rear of my Amana. Using a socket attached to a screw driver I turned 4 screws out of the element and it wa
... Read more
s free. I brought the element closer and compared it with the new element and made note of the wire pattern. I plugged in the new wires I received in the box into the new unit and then one by one unhooked the wire leads coming out of the dryer. I reversed the above there it was...maybe 30 minutes!
Read less
-
Tim from Sisseton, SD
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers, Socket set
4 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Not much heat
Loosened the screws, took out the old one. It shorted out to back. Inserted the new one attached wires, Installed screws and it worked
-
Richard from Rochester, NY
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer would not put out any heat
This was the second time we lost the High Limit Thermal Fuse. My wife dried some new towels and the lint filter completely plugged before the cycle was done and popped the high limit fuse. I went throught this before and paid a fortune for a repairman and ended up installing the thermal fuse myself so I did it myself and saved about $10
... Read more
0. I also ordered an element kit so I have it. I will just swap out element units if there is a next time. Maybe the next time we buy new towels. It only takes few minutes to remove the front lower panel and unplug two wires, remove two screws and the element assembly with both the fuse and the thermostat are out. It is easy to replace the fuse with the element assembly in your hands and in good light.
Read less
Other Parts Used:
-
John from Hoquiam, WA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers, Socket set
18 of 23 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer was not heating
I just took the bottom front panel off and the parts I needed to rplace where in the back and very easy to get to . I decided to replace all 3 while I was in there. The parts were not to high, so that is why I did that.
Other Parts Used:
-
ronald from murfreesboro, TN
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver, Screw drivers
4 of 8 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The dryer wasn't drying quick enough.
removed the lower cover, tipped the dryer on its back for easier access, unscrewed the 2 mounting screws removed the heating element, installed the thermostat and and high tempt relay on new one replaced the wires reinstalled the new element, very simple
-
DOUG from GRESHAM, OR
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
no heat
did basic diagnostics to narrow down the problem to be likely one of the three parts include w/ the kit. removed front panel and confirmed that part looked like the one on the web page. part arrived 3 business days after ordering.
used nutdriver to remove two screws holding old part in place. pulled old part out still attached to w ... Read more iring harness and assembled new part and attached wires the same way as the old part. installed new part, plugged in dryer and confirmed that it was heating. replaced front pannel and dryer is now working as well as ever. hardest part was reaching to the back of the dryer from the front while lying on the floor. total cost was cheaper than a service call, let alone paying for parts and labor from a service tech.
used nutdriver to remove two screws holding old part in place. pulled old part out still attached to w ... Read more iring harness and assembled new part and attached wires the same way as the old part. installed new part, plugged in dryer and confirmed that it was heating. replaced front pannel and dryer is now working as well as ever. hardest part was reaching to the back of the dryer from the front while lying on the floor. total cost was cheaper than a service call, let alone paying for parts and labor from a service tech.
Read less
-
Scott from Colorado Springs, CO
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver
2 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
heating element had a short (broken heating coil) & belt had seen better days very worn after 14 years of service
remove front part of the dryer and rise up the top to remove drum to replace the belt. than remove two screws for the heating element piece of cake repair.
Other Parts Used:
-
Robert from Manteca, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Socket set
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
no heat and worn out belt
The repair went very well. The parts were a perfect fit and arrived earlier than expected.It took a little longer than it should have to do the repair because of my recent surgery I had my 11 year old grandson operating the nut driver taking the dryer apart install the parts then reassemble under my watch full eye. You could say it went s
... Read more
o easy a fifth grader could do it.
Read less
Other Parts Used:
-
Robert from Lincoln, NH
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer had no heat.
I took off two screws on the front panel and removed it. I then located the old element inside at the back, left side of the dryer. I removed the two screws holding it in and then transfered the wires to the new element. My dryer works better than it ever did before. Thanks,
-
Josh from Schulenburg, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver
3 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- 2
- Next >
Back to Top
Questions and Answers
Be the first to ask our experts a question about this part!
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Back to Top
Model Cross Reference
This part works with the following models:
PartSelect Number: PS2061575
Manufacturer Part Number: 61927
Manufacturer Part Number: 61927
Brand
Model Number
Description
Speed Queen
AEM407L2-PAEM402L2
Dryer
- Speed Queen Dryer Model AEM407L2-PAEM402L2 (AEM407L2PAEM402L2, AEM407L2 PAEM402L2) Parts
Speed Queen
AEM407W2-PAEM402W2
Dryer
- Speed Queen Dryer Model AEM407W2-PAEM402W2 (AEM407W2PAEM402W2, AEM407W2 PAEM402W2) Parts
Speed Queen
AEM427L2-PAEM427L2
Dryer
- Speed Queen Dryer Model AEM427L2-PAEM427L2 (AEM427L2PAEM427L2, AEM427L2 PAEM427L2) Parts
Speed Queen
AEM427W2-PAEM427W2
Dryer
- Speed Queen Dryer Model AEM427W2-PAEM427W2 (AEM427W2PAEM427W2, AEM427W2 PAEM427W2) Parts
Speed Queen
AEM477L2-PAEM477L2
Dryer
- Speed Queen Dryer Model AEM477L2-PAEM477L2 (AEM477L2PAEM477L2, AEM477L2 PAEM477L2) Parts
Speed Queen
AEM477W2-PAEM477W2
Dryer
- Speed Queen Dryer Model AEM477W2-PAEM477W2 (AEM477W2PAEM477W2, AEM477W2 PAEM477W2) Parts
Speed Queen
AEM497L2-PAEM497L2
Dryer
- Speed Queen Dryer Model AEM497L2-PAEM497L2 (AEM497L2PAEM497L2, AEM497L2 PAEM497L2) Parts
Speed Queen
AEM497W2-PAEM497W2
Dryer
- Speed Queen Dryer Model AEM497W2-PAEM497W2 (AEM497W2PAEM497W2, AEM497W2 PAEM497W2) Parts
Speed Queen
AEM677L2 PAEM677L2
Dryer
- Speed Queen Dryer Model AEM677L2 PAEM677L2 (AEM677L2PAEM677L2) Parts
Speed Queen
AEM677W2 PAEM677W2
Dryer
- Speed Queen Dryer Model AEM677W2 PAEM677W2 (AEM677W2PAEM677W2) Parts
Speed Queen
AEM697L2 PAEM697L2
Dryer
- Speed Queen Dryer Model AEM697L2 PAEM697L2 (AEM697L2PAEM697L2) Parts
Speed Queen
AEM697W2 PAEM697W2
Dryer
- Speed Queen Dryer Model AEM697W2 PAEM697W2 (AEM697W2PAEM697W2) Parts
Speed Queen
AGM409L2 PAGM409L2
Dryer
- Speed Queen Dryer Model AGM409L2 PAGM409L2 (AGM409L2PAGM409L2) Parts
Speed Queen
AGM409W2 PAGM409W2
Dryer
- Speed Queen Dryer Model AGM409W2 PAGM409W2 (AGM409W2PAGM409W2) Parts
Speed Queen
AGM429L2 PAGM429L2
Dryer
- Speed Queen Dryer Model AGM429L2 PAGM429L2 (AGM429L2PAGM429L2) Parts
Speed Queen
AGM429W2 PAGM429W2
Dryer
- Speed Queen Dryer Model AGM429W2 PAGM429W2 (AGM429W2PAGM429W2) Parts
Speed Queen
AGM479L2 PAGM479L2
Dryer
- Speed Queen Dryer Model AGM479L2 PAGM479L2 (AGM479L2PAGM479L2) Parts
Speed Queen
AGM479W2 PAGM479W2
Dryer
- Speed Queen Dryer Model AGM479W2 PAGM479W2 (AGM479W2PAGM479W2) Parts
Speed Queen
AGM499L2 PAGM499L2
Dryer
- Speed Queen Dryer Model AGM499L2 PAGM499L2 (AGM499L2PAGM499L2) Parts
Back to Top
Heating Element Kit - Red Dot
$
102.15
On Order
✖
Stock Status
In Stock
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.