| |
1 of 2 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:30 - 60 mins
ToolsScrew drivers
CustomerPaul from Taylor TX
Ice dispenser quit working the trap door was broken
first I remove screws arounf ice/water door dispenser and pulled dispenser away from refrig door to expose ice door assembly. i removed assembly and replaced and put back together. First time I ever did anything like this was pretty easy saved me some $$$$$$$$$$$$$
|
0 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsPliers, Screw drivers
CustomerSamuel from Burke VA
Ice chute door return spring
Used your instructions . went very well about 10 min.
|
0 of 2 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:Less than 15 mins
Tools
CustomerRandy from Taylor AL
Ice door broken tab - won't close completely
Parts arrived within a couple of days. Repair was easy using a torx driver. I removed the screws that held the cover onto the door and then a couple more once the cover was removed. Ice door snapped into place and reassembly was a simple reversal of the disassembly. Unit now works great. Parts were very reasonably priced and delivery was very timely.
|
1 of 6 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:30 - 60 mins
ToolsScrew drivers
CustomerMark from beverly hills MI
Ice dispenser door won't close
It was only the door but it wouldn't come out without disassembly of the entire dispensing section; this meant removing the front section and disconnecting 2 pcs from 3 wire harnesses...much more involved than I thought. The spring and strike were fine, but when I reassembled the unit it didn't work. The key was the mechanical connection with the solenoid. It is not obvious and directions would have been helpful. BTW unlike me, flip the power off. I got a good shock from the accuator.
|