2061141-2-S-Whirlpool-61005886-Ice Door Strike
2061141-2-S-Whirlpool-61005886-Ice Door Strike 2061141-1-S-Whirlpool-61005886-Ice Door Strike 2061141-3-S-Whirlpool-61005886-Ice Door Strike

Ice Door Strike

PartSelect Number PS2061141

This door strike is located within the mechanical components if the ice and water dispenser. With the help of the solenoid, this piece opens and closes the ice dispenser door.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Ice maker won’t dispense ice.
  • Compare At

    $4.75
  • You Save

    $.79
  • Your Price

    $3.96
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Ice Chute Door Return Spring

Part Number 2059882

Sold Individually.

$4.46
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.9 / 5.0, 4 reviews What's this?
1-4 of 4
 

1 of 2 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:30 - 60 mins

ToolsScrew drivers

CustomerPaul from Taylor TX

Ice dispenser quit working the trap door was broken

first I remove screws arounf ice/water door dispenser and pulled dispenser away from refrig door to expose ice door assembly. i removed assembly and replaced and put back together. First time I ever did anything like this was pretty easy saved me some $$$$$$$$$$$$$

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 2 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:Less than 15 mins

Tools

CustomerRandy from Taylor AL

Ice door broken tab - won't close completely

Parts arrived within a couple of days. Repair was easy using a torx driver. I removed the screws that held the cover onto the door and then a couple more once the cover was removed. Ice door snapped into place and reassembly was a simple reversal of the disassembly. Unit now works great. Parts were very reasonably priced and delivery was very timely.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 3 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsPliers, Screw drivers

CustomerSamuel from Burke VA

Ice chute door return spring

Used your instructions . went very well about 10 min.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 9 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:30 - 60 mins

ToolsScrew drivers

CustomerMark from beverly hills MI

Ice dispenser door won't close

It was only the door but it wouldn't come out without disassembly of the entire dispensing section; this meant removing the front section and disconnecting 2 pcs from 3 wire harnesses...much more involved than I thought. The spring and strike were fine, but when I reassembled the unit it didn't work. The key was the mechanical connection with the solenoid. It is not obvious and directions would have been helpful. BTW unlike me, flip the power off. I got a good shock from the accuator.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-4 of 4