2060989-1-S-Whirlpool-61005651-Temperature Control
2060989-1-S-Whirlpool-61005651-Temperature Control 2060989-2-S-Whirlpool-61005651-Temperature Control 2060989-3-S-Whirlpool-61005651-Temperature Control

Temperature Control

PartSelect Number PS2060989

This part establishes and maintains the internal temperature of the refrigerator.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Fridge section too warm.
  • Compare At

    $83.59
  • You Save

    $13.93
  • Your Price

    $69.66
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 2.3 / 5.0, 2 reviews What's this?
1-2 of 2
 

12 of 17 people found this instruction helpful

Parts Used

Level of DifficultyA Bit Difficult

Time to do repair:1- 2 hours

ToolsNutdriver, Screw drivers

CustomerJames from Scotts Valley CA

Constant running, ice build-up in evaporator, fridge side warm

Simple parts replacement. The temp control was a bit tricky as it involved replicating the bends of the tiny tubing for the sensor coil, but everything is so modular that it was not that difficult.

Freezer defrosted while doing the control repairs, it had a lot of ice stuck in the evaporator because the defrost function was not working.

The worst part of all this was moving the food and making sure it did not spoil.

Help other customers find the most helpful instructions.

Were these instructions helpful?

82 of 632 people found this instruction helpful

Parts Used

Level of DifficultyA Bit Difficult

Time to do repair:1- 2 hours

ToolsScrew drivers, Socket set

CustomerJimmy from Stratford TX

The coils would freeze up and it wouldn't cool.

I removed the screws on the covers and remove them, then taken the screws from the timer, the temperature control just set in there, then pulled out a lttle ways and disconnected the wires and then removed. Installed the new ones. I taken the back panel off and removed the clip and pulled the defrost heater out a ways and removed the wires and removed the defrost heater. Installed the new defrost heater and clip and the covers.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-2 of 2