1 of 1 people found this instruction helpful
Level of DifficultyEasy
Time to do repair:15 - 30 mins
ToolsScrew drivers, Socket set
CustomerStephanie from Cupertino CA
The inside of the handle had broken and was pinching us.
First I snapped out the outer cover just as much as I needed to access the screws holding the inside part on. (Note that I didn't remove it completely). Then I removed the four screws that held the part in place and removed the damaged part. I noticed that the original part had some adhesive strips, but I didn't replace them. I screwed the replacement part in place and snapped the outer cover back.