2059557-1-S-Whirlpool-61004010-Fresh Food Door Gasket
2059557-1-S-Whirlpool-61004010-Fresh Food Door Gasket 2059557-2-S-Whirlpool-61004010-Fresh Food Door Gasket 2059557-3-S-Whirlpool-61004010-Fresh Food Door Gasket

Fresh Food Door Gasket

PartSelect Number PS2059557

This white gasket is used to seal the door when closed to keep the cool air inside and the room air out.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Door sweats inside or outside.
  • Fridge section too warm.
  • Leaking water.
  • Refrigerator runs too long.
  • Compare At

    $126.77
  • You Save

    $21.13
  • Your Price

    $105.64
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Fresh Food Door Gasket

Part Number 2059564

This black door gasket is used to seal the refrigerator door when closed to keep the cool air inside and the room air out.

$104.64
In Stock

Freezer Door Gasket

Part Number 2059556

This door gasket is used to seal the freezer door when closed.

$93.14
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.0 / 5.0, 12 reviews What's this?
1-12 of 12
 

13 of 14 people found this instruction helpful

Parts Used

  • Fresh Food Door Gasket

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerROBERT from BASSETT VA

Door seal worn out, needed replacement

To make instalation much easier, I removed the door and layed it on a table. I then remobved about 45 screws,removed the inner door section, removed the seal and installed new seal in reverse order being careful not to over tighten the screws. Having the door lying on the table made it much easier to place the gasket in place and make any minor adjustments. I then replaced the door and everything workes just fine.

Help other customers find the most helpful instructions.

Were these instructions helpful?

19 of 44 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:30 - 60 mins

ToolsPliers, Screw drivers, Wrench(Adjustable)

CustomerJerry from Harahan LA

Minor touch up repairs and missing parts to fridge

Was self-explanatory, but the site was very useful with the drawings to figure out what parts I needed to order

Help other customers find the most helpful instructions.

Were these instructions helpful?

6 of 7 people found this instruction helpful

Parts Used

  • Fresh Food Door Gasket

Level of DifficultyVery Difficult

Time to do repair:More than 2 hours

ToolsScrew drivers

CustomerCHRISTOPHER from SAN JOSE CA

Door seal was falling apart

Replacing the door seal only involved unscrewing about 50 screws, attaching the new seal, & screwing all 50 screws back in. I'm glad I have a good electric screwdriver. The hard, if not impossible part, is trying to get the door to seal properly again. At first the door wouldn't close all the way, so after 2 hours of tinkering, it will close now, but the top left corner of the magnetic gasket will not seal no matter what.

Help other customers find the most helpful instructions.

Were these instructions helpful?

5 of 7 people found this instruction helpful

Parts Used

  • Fresh Food Door Gasket

Level of DifficultyA Bit Difficult

Time to do repair:1- 2 hours

ToolsNutdriver, Socket set

CustomerDavid from Agawam MA

Torn door gasket - cold air leaks out

The repair goes much easier if the door is removed. The door is bulky and that's the difficult part. Once its on the table, unscrew to get old one off, put new one in place and re screw. (there are many screws) Then bulky door needs to be placed back onto the refrigerator. Again difficult positioning, weight, bulky. The door comes off and goes on very easily (2 mins to get off, 10 to put back on). Just 3 lower screws. This job could have taken less than an hour if I had started with a removed door.

Help other customers find the most helpful instructions.

Were these instructions helpful?

5 of 7 people found this instruction helpful

Parts Used

  • Fresh Food Door Gasket

Level of DifficultyA Bit Difficult

Time to do repair:1- 2 hours

ToolsNutdriver

CustomerAlan from Houston TX

Replace torn door gasket.

The first order of business was to find a supplier for the gasket and to make sure that the right one was ordered. This was done with out a hitch @ Part Select and at a cost less than the retail stores. The right Gasket was ordered thru Parts Select

Only difficulty was to start the install of the replacment .
Need to start at the hinged corner of the door Top & Bottom for a good fit and less hassel.

Thank you Part Select for the service.

Alan E. Bischof
Houston Texas

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 4 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:30 - 60 mins

ToolsScrew drivers, Wrench set

CustomerJeff from Crownsville MD

Old seals around doors were leaking cool air.

Easy as could be. Unscrew the bolts on the inside of the seal, take off the old seal, place new seal on and screw back in. Saved myself $150 by doing it myself. So easy, my 7 year old could have done it.

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 7 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:30 - 60 mins

ToolsNutdriver, Screw drivers

CustomerTodd from Collegeville PA

Refrigerator door weatherstripping torn

Removed all screws on the door that retained weatherstripping, removed weatherstripping and inside of door. Inserted new weatherstripping, lined up inside of door and loosely re-installed screws. After minor alignment adjusting, went back and tightened all screws. Replacement part was a perfect fit.

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 4 people found this instruction helpful

Parts Used

  • Fresh Food Door Gasket

Level of DifficultyEasy

Time to do repair:1- 2 hours

ToolsSocket set

CustomerLaurence from San Diego CA

Old gasket leaking

The gasket is sandwiched between the main door and the shelf assembly.

What holds them together is 42 1/4in hex head self tapping screws that run along the edge (each one is finger tight).

I would highly recommend a power drill with a 1/4 hex socket to remove the screws. It makes things much faster. Be careful when screwing the screws back in with the power drill(you only want them finger tight). If the screws are too tight,the gasket will bulge out in places.

At first the seal may feel weak. Keep the door closed for a couple of hours and the seal should improve.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 2 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:30 - 60 mins

ToolsNutdriver

CustomerDelmon from Omaha NE

Leaky gaskets (freezer & refrigerator0

TOOK DOORS OFF, PLACED ON COUNTER, REMOVED THE SCREWS ANS INSTALLED GASKETS SEALS.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

  • Fresh Food Door Gasket

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerRobert from New City NY

Old door seal was torn

Removed screws & old seal replaced seal and screws.

Result: New seal will not lay flat against the door making it difficult to close the door completely and causing the compressor to work overtime. I am hoping that it eventually flattens out.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

  • Fresh Food Door Gasket

Level of DifficultyReally easy

Time to do repair:30 - 60 mins

ToolsScrew drivers

CustomerMalcolme from Saint Petersburg FL

Refrigerator fresh food gasket

I merely removed the old one and replaced the old one, I luckily had a ratcheting screw driver which made things go alot quicker as there were 36 screws holding the gasket on the inside of the door, also I had to replace some of the screws that I tightened as they stripped out in the door metal, I GOT SOME OF THE SAME DIMENTION with a slightly larger thread new screws and carefully screwed them in with no problems at all. Thank you for your professional speedy service. I will surely contact you again when I need parts for my appliances even if I m not the MAYTAG repair man.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 3 people found this instruction helpful

Parts Used

  • Fresh Food Door Gasket

Level of DifficultyReally easy

Time to do repair:1- 2 hours

ToolsNutdriver

CustomerBILLY from DANIA BEACH FL

Torn food door gasket

Removed screws securing the inner door compartment, installed new gasket on door compartment and reinstalled inner door compartment.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-12 of 12