2059377-1-M-Whirlpool-61003803-Fountain-Bracket-Black.jpg
2059377-1-S-Whirlpool-61003803-Fountain-Bracket-Black.jpg 2059377-2-S-Whirlpool-61003803-Fountain-Bracket-Black.jpg 2059377-3-S-Whirlpool-61003803-Fountain-Bracket-Black.jpg

Fountain Bracket - Black

PartSelect Number PS2059377

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

  • Compare At

    $38.38
  • You Save

    $6.40
  • Your Price

    $31.98
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.0 / 5.0, 2 reviews What's this?
1-2 of 2
 

1 of 2 people found this instruction helpful

Parts Used

  • Fountain Bracket - Black

Level of DifficultyEasy

Time to do repair:30 - 60 mins

ToolsNutdriver, Pliers

CustomerBill from Newton NJ

The solenoid from that operates the fountain went south

I ordered new solenoid that came with door. I installed it and it was making a very loud buzzing noise. I also had a frost buildup between the icemaker and the icemaker chute in the door. I posted my problem on the forum and Sheila suggested that the heat from the defective solenoid might have distorted the fountain housing, causing the new solenoid not to seat right, and possibly letting outside air into the icemaker. On closer inspection I saw that the hosing WAS distorted. I ordered a new one, installed it, problem solved! Hats off to the staff here, where else can you get a diagnosis first -so you know what parts to order!

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 3 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:1- 2 hours

Tools

CustomerPeter from St. Augustine FL

Ice door dispensor broke

Followed the directions provided with the solenoid and door kit to replace solenoid, door and actuator. Replacing bracket was intuitive, just required transferring of parts from one to the other (miro-switch, cabling, light socket, and circuit board), and then installing the actuator pad on it.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-2 of 2