Gas Valve Assembly

PartSelect Number PS2055563

This valve comes with electrical solenoids/coils.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 5.0 / 5.0, 3 reviews What's this?
1-3 of 3
 

2 of 3 people found this instruction helpful

Parts Used

  • Gas Valve Assembly

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsPliers, Screw drivers, Wrench set

CustomerGrant F from Lansing MI

Gas value would not open - no heat

First of all PartSelect.com was very helpful on the phone. I did a little research on the website and called to confirm. Ordering was simple. I got the part in a few days - matched perfectly. Start to finish the swap was under 15 min. Works like a champ. :)

Just saved $500 by not buying a new dryer.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 4 people found this instruction helpful

Parts Used

  • Gas Valve Assembly

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsWrench set, Wrench(Adjustable)

CustomerGeoffrey from Centerburg OH

The burner on the dryer would not light although the glow plug was working

First I shut off the gas supply (the valve is an in-line shut-off and it's right there. I removed both of the retaining screws and detached the gas supply line.

Remove hte valve from the mounting plate (two more screws) and then reversed the process to replace the part.

It works just fine, thank you very much!!

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

  • Gas Valve Assembly

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsWrench(Adjustable)

CustomerArnold from Montclair NJ

Lost heat flame would not ignite

Shut off gas supply Unmounted old valve replaced with new onme turned om gas machine worked right away

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-3 of 3