| |
10 of 14 people found this instruction helpful
Parts Used
-
- Turntable Guide with Rollers
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerR. from Hudson FL
Turntable wheel broke off
Just replaced it with the part that was sent -- no physical tools used.
The part was sent when promised and arrived promptly. I would recommend this company for part replacements.
|
2 of 2 people found this instruction helpful
Parts Used
-
- Turntable Guide with Rollers
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerLateshia from Campbellsville KY
Old wheels wore out
took out old turntable and placed new one in
|
2 of 2 people found this instruction helpful
Parts Used
-
- Turntable Guide with Rollers
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerFloyd from Hot Springs AR
The rollers on the turntable guide had broken lose.
Lifted out the glass turntable plate and removed broken turntable guide. Placed new turntable guide into place and replaced the glass turntable plate.
|
2 of 3 people found this instruction helpful
Parts Used
-
- Turntable Guide with Rollers
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerDaniel from Chestertown MD
Turntable roller for plate
open door, place roller in the microwave, put the glass plate back in place -- done.
|
1 of 2 people found this instruction helpful
Parts Used
-
- Turntable Guide with Rollers
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerJeff from Littleton CO
Wrong part
easy nothing to it. A cave man could have done it
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerJack from Port Ludlow WA
Cooking tray broken and turntable guide burned
Just placed items in the microwave and all fit and worked correctly.
Parts were delivered sooner than I would have expected. Good service from supplier.
|
1 of 4 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsPliers
CustomerPeter from Bernhards Bay NY
Squealing rubbing noise during all cycles
DISCONECTED WATER LINES. DRAIN LINE AND ELECTRIC PLUG. LAID WASHER ON ITS FRONT SIDE, FOUND BADLY WORN PUMP BELT. ROLLED OFF OF PULLEY,ORDERED NEW ONE. REPLACED WITH NEW BELT. NO COVERS TO TAKE OFF EVERYTHING EASY TO GET AT. PROBLEM SOLVED./
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers, Socket set
CustomerMARIA from Bremerton WA
Wouldnt heat
My husband loves to repair an so you were our choicereppareth
|
2 of 7 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerGlen from Lebanon TN
Turn table inop.
first removed four screws lower panel, one motor screw,electrical connector, and reversed procedure done. To add a little to this repair story, we had a recall on our maytag dish washer, asked if at the same time they could bring a motor out for microwave, they said no without diag. time, also told them I'd pay for install, even if my diag. was wrong, and the part also, there lose! Thank you all having the correct parts at a very reasonable price.
|