2052603-1-S-Whirlpool-56001139-Outer Door Handle of Two Piece Door Handle
2052603-1-S-Whirlpool-56001139-Outer Door Handle of Two Piece Door Handle 2052603-2-S-Whirlpool-56001139-Outer Door Handle of Two Piece Door Handle 2052603-3-S-Whirlpool-56001139-Outer Door Handle of Two Piece Door Handle

Outer Door Handle of Two Piece Door Handle

PartSelect Number PS2052603

Screws NOT included. White in color.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

  • Compare At

    $59.23
  • You Save

    $9.87
  • Your Price

    $49.36
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Inner Door Handle

Part Number 2052600

This white inner door handle is part of a two piece door handle assembly.

$49.01
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.7 / 5.0, 11 reviews What's this?
1-11 of 11
 

13 of 14 people found this instruction helpful

Parts Used

  • Outer Door Handle of Two Piece Door Handle

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsPliers, Screw drivers

Customercharles from round rock TX

Outer handle on microwane

removed trim around inside of door with putty knife.
disconnect latch spring with needle nose plyers.
remove two handle screws.
remove small screw on handle to separate outer handle from inner handle.
replace outer handle and assemble with inner replace screw.
connect handle in door
snap tim back into place

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 7 people found this instruction helpful

Parts Used

  • Outer Door Handle of Two Piece Door Handle

Level of DifficultyEasy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerCorley from Fort Stockton TX

Two tiny plastic posts, which cracked or broke resulting in door handle almost falling off

My son-in-law took the handle off. We saw the problem (Maytag put two tiny plastic posts that crack about once a year. This was the 2nd replacement in 2 years.) When the new part came in my 15 year old grandson put it on easily. This is a no-brainer!

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

  • Outer Door Handle of Two Piece Door Handle

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerEffie from Hilltop Lakes TX

Followed instructions from internet

My son took the door sealer off. It just pulls off easily. Then with screw driver took out the screws and put on the outer part of handle and replaced the screws and bracket. Took less than 30 minutes after we found how to do it.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

  • Outer Door Handle of Two Piece Door Handle

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerTom from Brecksville OH

Handle broken

remove inner door frame,remove screws holding inner and outer handles reuse inner handle,replace outer handle as needed reinstall inner door frame.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsPliers, Screw drivers

CustomerDavid from Fredericksburg PA

Broken inner and outer handle

1. Open Door
2. Use Putty Knife and and carefully separate outer door frame from inner door frame
by sliding the putty knife all the way around the frame from the inside
3. Remove the old broken handle. You should use a pointy nose pliers to take hold of the
handle screws once you have then loose...
4. Install new handle, Make sure it is seated flush in the door frame, then tighten with
two screws (use the pointy nose pliers to get them started . .very tight space to work in)
5. Snap on outer frame.
6. Your done!
Dave

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

  • Outer Door Handle of Two Piece Door Handle

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerDan from Riverview FL

Door handle snapped off where screws attach

I pondered getting both the inside and outside parts but went with the outside only. Prying the gasket loose went very easily, and removing the latches went easy too (to expose the bottom screw. I found the inner handle base broken but glued it together, not worrying too much because the real attchment to the door is done with the outer handle screws. I can see why the handle broke in the first place because the screws went in with a lot of torque necessary. I suspect that this weakened the posts so I lubricated the screws and backed them in and out so as not to stress the posts. I think all that is necessary is the outer handle, if you want to save some money. Everything snapped back into place easily and it is done after listening to the wife complain for almost 6 months. Part Select is a great site for appliance repair.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsPliers, Screw drivers

CustomerRuth from New Bloomfield MO

Microwave handle was completely broken off

Found info on how to replace handle here. Couldn't have done it without that information! We popped out the black trim on the inside of the door and removed the spring to access the bottom screw. From there it was pretty much easy to see where ever thing fit. Had difficulty getting the tabs clipped in the front of the door.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:More than 2 hours

ToolsScrew drivers

CustomerBonnie G from Port Townsend WA

Microwave door handle broke

I received the door handle in 2 pieces along with one screw to put the two together. 3 days later the 2 screws to attach the handle to the microwave door showed up so I could finally put the handle on. I was amazed that I had to purchase each piece separately and that they pieces were shipped in two deliveries.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyA Bit Difficult

Time to do repair:15 - 30 mins

ToolsPliers, Screw drivers

CustomerJoseph from Bridgewater NJ

Handle broke off original microwave door

Separated the inside panel on the microwave door, removed the screws from the old door handle and utilized them to install new door handle. Access to the screws was a little tight thus the "a bit difficult" rating.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Outer Door Handle of Two Piece Door Handle

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerMichael from Chaska MN

Handle broke from our over the range microwave oven

removed screws from the old handle (this took the longest amount of time - 5 minutes, and required a needle nose pliers and a screw driver). Replacing the handle took 2 minutes to screw the handle to the door. Very easy!!

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Outer Door Handle of Two Piece Door Handle

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerDavid from Parma OH

Replaced broken door handle

Removed the door from the oven by lifting and unhooking from appliance.
With a small putty knife remove the snap-in ring from the inner door.This will expose the screws that hold the handle.
Replace then put everything back in reverse order.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-11 of 11