2 of 2 people found this instruction helpful
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Mark from plymouth, MN
Light under microwave did not light
Unplug microwave above stove. Removed 4 philip head screws on microwave vent . Remove vent to access LED display console. Opened LED display console. Removed 2 phillip head screws on control board , ribbon connector,and 2 quick connect plugs. Install new control board , 2 phillip heads, ribbon connector and 2 quick connect plugs. Closed LED display console . Reinstall microwave vent and 4 screws. Plug in microwave.
High and low level lights work.