3 of 9 people found this instruction helpful
Level of DifficultyReally Easy
Time to do repair:Less than 15 mins
ToolsNutdriver, Screw drivers
CustomerJohn from Saint Petersburg, FL
Gas dryer not drying clothes in one cycle
Unplugged the dryer. Released the two forward sping clips holding the top in place and hinged it open. Removed the two 1/4" screws(one on each upper edge of front panel). Disconnected the door switch. Pulled out and up to remove the front panel. Located the cycling thermostat on the blower housing. Disconnected the thermostat wires, removed the (2) 1/4" screws. Installed the new thermostat and assembled in reverse order.