2047808-1-S-Whirlpool-53-0918-Lint Filter
2047808-1-S-Whirlpool-53-0918-Lint Filter 2047808-2-S-Whirlpool-53-0918-Lint Filter 2047808-3-S-Whirlpool-53-0918-Lint Filter http://www.partselect.com/Schematics/Maytag/35989.gif

Lint Filter

PartSelect Number PS2047808

This lint filter screen has two side guides on either side of the screen. One measures 3/8 of an inch wide, while the other measures 5/8 of an inch wide.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Takes too long to dry.
  • No heat or not enough heat.
  • Noisy.
  • Will Not Start.
  • Compare At

    $14.83
  • You Save

    $2.47
  • Your Price

    $12.36
Special Order
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Lint Filter

Part Number 2047790

Both sides of this filter are the same width - 3/8".

Order within the next 58 mins and your part ships today!
$28.02
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.6 / 5.0, 32 reviews What's this?
1-5 of 32
 

463 of 470 people found this instruction helpful

Parts Used:
  • Lint Filter
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Jane from Grand Forks, ND

Lint filter broke

I pulled out the broken lint filter and put the new one back in, real easy. I am so happy with the prompt delivery I got from PartsSelect.com. I ordered on a Monday and and it was delivered on a Wednesday

Help other customers find the most helpful instructions.

Were these instructions helpful?

372 of 380 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 30 - 60 mins
Tools: Screw drivers, Socket set
Customer: Stan from Riverside, CA

No heat

Lift the top. Remove (2) screws holding the front of the dryer in place. Lift the front off the 2 retaining clips on the bottom of the dryer. The hardest part of the install was removing and replacing the igniter. A couple of helping hands from the girlfriend to hold the parts in place while I replaced the two screws was very helpfull. Installing the multi rib belt was also very easy with the help of a second pair of arms to reach under the drum to thread the belt onto the tensioner. The lint filter, of coarse was just a matter of throwing the old cracked one away and replacing w/ the new.

Help other customers find the most helpful instructions.

Were these instructions helpful?

128 of 201 people found this instruction helpful

Parts Used:
  • Lint Filter
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: BRUCE from SAN MARCOS, CA

Broken lint filter

First went and got a beer.
Looked at the dryer.
Drank my beer.
Went and got one more, due to long job.
Looked at dryer again.
Opened the door.
Had to get one more beer.
Removed filter.
Got one more cold one.
Put new filter in.
Got one more beer.
Closed door.
Finished!

Help other customers find the most helpful instructions.

Were these instructions helpful?

69 of 69 people found this instruction helpful

Parts Used:
  • Lint Filter
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Timothy from Cheektowaga, NY

Lint filter broke

I slid in the new one

Help other customers find the most helpful instructions.

Were these instructions helpful?

85 of 162 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Socket set
Customer: PATRICIA from NEW CARLISLE, OH

Agitator wouldn't turn

Not sure, my husband did the repair but said it wa real easy and if he can do it anyone can, lol

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-5 of 32