2047808-1-S-Whirlpool-53-0918-Lint Filter
2047808-1-S-Whirlpool-53-0918-Lint Filter 2047808-2-S-Whirlpool-53-0918-Lint Filter 2047808-3-S-Whirlpool-53-0918-Lint Filter http://www.partselect.com/Schematics/Maytag/35989.gif

Lint Filter

PartSelect Number PS2047808

This lint filter screen has two side guides on either side of the screen. One measures 3/8 of an inch wide, while the other measures 5/8 of an inch wide.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Takes too long to dry.
  • No heat or not enough heat.
  • Noisy.
  • Will Not Start.
  • Compare At

    $14.83
  • You Save

    $2.47
  • Your Price

    $12.36
Special Order
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Lint Filter

Part Number 2047790

Both sides of this filter are the same width - 3/8".

Order within the next 7 hrs and your part ships today!
$28.02
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.6 / 5.0, 32 reviews What's this?
1-15 of 32
 

463 of 470 people found this instruction helpful

Parts Used:
  • Lint Filter
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Jane from Grand Forks, ND

Lint filter broke

I pulled out the broken lint filter and put the new one back in, real easy. I am so happy with the prompt delivery I got from PartsSelect.com. I ordered on a Monday and and it was delivered on a Wednesday

Help other customers find the most helpful instructions.

Were these instructions helpful?

372 of 380 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 30 - 60 mins
Tools: Screw drivers, Socket set
Customer: Stan from Riverside, CA

No heat

Lift the top. Remove (2) screws holding the front of the dryer in place. Lift the front off the 2 retaining clips on the bottom of the dryer. The hardest part of the install was removing and replacing the igniter. A couple of helping hands from the girlfriend to hold the parts in place while I replaced the two screws was very helpfull. Installing the multi rib belt was also very easy with the help of a second pair of arms to reach under the drum to thread the belt onto the tensioner. The lint filter, of coarse was just a matter of throwing the old cracked one away and replacing w/ the new.

Help other customers find the most helpful instructions.

Were these instructions helpful?

128 of 201 people found this instruction helpful

Parts Used:
  • Lint Filter
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: BRUCE from SAN MARCOS, CA

Broken lint filter

First went and got a beer.
Looked at the dryer.
Drank my beer.
Went and got one more, due to long job.
Looked at dryer again.
Opened the door.
Had to get one more beer.
Removed filter.
Got one more cold one.
Put new filter in.
Got one more beer.
Closed door.
Finished!

Help other customers find the most helpful instructions.

Were these instructions helpful?

69 of 69 people found this instruction helpful

Parts Used:
  • Lint Filter
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Timothy from Cheektowaga, NY

Lint filter broke

I slid in the new one

Help other customers find the most helpful instructions.

Were these instructions helpful?

85 of 162 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Socket set
Customer: PATRICIA from NEW CARLISLE, OH

Agitator wouldn't turn

Not sure, my husband did the repair but said it wa real easy and if he can do it anyone can, lol

Help other customers find the most helpful instructions.

Were these instructions helpful?

77 of 141 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Andrea from Santee, CA

Door seal partially torn off. Lint filter worn with holes.

Parts Select made it extremely easy to order parts from their site. Parts came in a timely manner and very reasonable priced. Thanks to Parts Select! Door Seal just needed to be removed and replaced by pushing into little slot openings.

Help other customers find the most helpful instructions.

Were these instructions helpful?

69 of 132 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Tonja from Green Bay, WI

Brooken lint filter and door seal

It was easy - I had my 12yr old daughter do it. The old door seal was completely removed, then you placed the new seal in the apropriate knoches that are on the door of the dryer. The lint filter just had to be placed in the vent. - Done.

Help other customers find the most helpful instructions.

Were these instructions helpful?

67 of 130 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 30 - 60 mins
Tools: Nutdriver, Screw drivers
Customer: Amaury from Wake Forest, NC

It wouldn't start

First I removed the two screws that hold the element in place. I then pulled the element completely out and disconnected the two wires.

From there it was just a matter of installing the new part.

Anybody could do it

Help other customers find the most helpful instructions.

Were these instructions helpful?

5 of 6 people found this instruction helpful

Parts Used:
  • Lint Filter
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Barbara from Oak Park, IL

My lint filter had developed holes.

It was supper easy. I was able to order the correct part from the detailed description you provided. I just opened it and slid it into the slot for a perfect fit.

I wish I had done it sooner. My filter had holes in it for some time.

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 4 people found this instruction helpful

Parts Used:
  • Lint Filter
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: vernon from chowchilla, CA

Hole in lint filter

ordered lint filter and it was here the next day.
GREATE SERVICE!!!!

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 5 people found this instruction helpful

Parts Used:
  • Lint Filter
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Ruth V from Westminster, CO

No problem, old filter had seen better days.

No Repair, just replacement. Went perfect.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: A Bit Difficult
Time to do repair: 30 - 60 mins
Tools: Screw drivers, Socket set
Customer: Jill from Hadley, PA

Dryer stopped running, hot smell, would not restart

I first made sure there was power to dryer. It was ok so I unpluged the dryer from the socket and afer researching on line I was sure it was the thermal fuse. I check continuity on the fuse and it did not have continuity. So I installed a new fuse and high temp thermostat (they come together)
Just lift top of dryer up and back. In the left rear corner is the heating element. On top of the element is the thermostat. On the right side is the fuse it is a round disc with two white wires attached. The thermostat and heating element need to be removed to install fuse (one screw each and lift out of the way ) . Need to check for blocked lint or like I had the white plastic hose had a kink and need replaced with metal lint hose.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 3 people found this instruction helpful

Parts Used:
  • Lint Filter
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: JANETTE from MIDDLESBORO, KY

The lint filter was broken in half

I ordered this part to replace broken lint filter. Shipping estimate was 3-5 working days. I had the part 2 days after I ordered it!! I was very surprised and extremely pleased. If I need anymore appliance parts, I know exactly where to go!

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 3 people found this instruction helpful

Parts Used:
  • Lint Filter
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Diane from Mahwah, NJ

Broken lint trap - plastic snapped

My part came a day or so after the order was placed. There was really no installation required, but I will definitly make orders from this site again. Thank you very much!

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 3 people found this instruction helpful

Parts Used:
  • Lint Filter
Level of Difficulty: Really Easy
Time to do repair: 30 - 60 mins
Tools:
Customer: evelyn from Brooklyn, NY

Dead dryer

Vacuum out the dryer vent & trap of all the tenant's sleeping bag stuffing, intall the new lint trap and Voila! It works again.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-15 of 32