2040790-1-S-Whirlpool-40016101-Agitator Drive Bell Seal
2040790-1-S-Whirlpool-40016101-Agitator Drive Bell Seal 2040790-2-S-Whirlpool-40016101-Agitator Drive Bell Seal 2040790-3-S-Whirlpool-40016101-Agitator Drive Bell Seal http://www.partselect.com/Schematics/Maytag/Maytag_Thumb/54315.gif

Agitator Drive Bell Seal

PartSelect Number PS2040790

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Leaking.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 1.9 / 5.0, 2 reviews What's this?
1-2 of 2
 

19 of 26 people found this instruction helpful

Parts Used

Level of DifficultyVery Difficult

Time to do repair:More than 2 hours

ToolsNutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set

CustomerBrian from Okauchee, WI

Leaky seal wreaked main bearing

Bearing is inexpensive but the seal kit is usually needed also

Help other customers find the most helpful instructions.

Were these instructions helpful?

9 of 15 people found this instruction helpful

Parts Used

  • Agitator Drive Bell Seal

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsNutdriver

CustomerJohn from Roswell, GA

Leaking water while washer runs

Biggest trick is getting the agitator off. It seems like it is bolted on. I used a piece of braided cotton cord to run under both sides of the agitator and just pulled real hard. It WILL pop off.

Next the old seal will also seem to be attached. The edge is firm but not bolted. A small prybar will help.

Easy repair to do, but it did not fix my problem. I decided to get a new washer rather than go through further disassembly.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-2 of 2