11742240-1-M-Whirlpool-WP400021-1-Screw
Part Location Diagram of WP400021-1 Whirlpool Screw
See part 10 in the diagram
( Grid squares measure 1x1 inch )
11742240-1-S-Whirlpool-WP400021-1-Screw 11742240-2-S-Whirlpool-WP400021-1-Screw 11742240-3-S-Whirlpool-WP400021-1-Screw Part Location Diagram of WP400021-1 Whirlpool Screw
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.com

Screw WP400021-1

 Fits your GT1727PACW!
★★★★★
★★★★★
1 Review

Rated by 5 customers 

Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

$ 13.25
  In Stock
Get FREE EconoShip on orders over $100! T&C apply

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your GT1727PACW!
PartSelect Number PS11742240
Manufacturer Part Number WP400021-1
Manufactured by Whirlpool
Product Description

Screw Specifications

Sold individually.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part works with the following products:
Refrigerator, Range, Cooktop, Dryer.
This part works with the following products:
Maytag, Admiral, Amana, Whirlpool.
Part# WP400021-1 replaces these:
AP6009097, 0041829, 0071847, 12990604, 22002060, 22002230, 22003263, 22003681, 3-14347, 3-24004-091, 314347, 31750416, 400021-1, 40021-1, 63001487, 67001380, 67001969, 67006602, 7101P685-60, 74003132 , 74007410, 74007714, 8208192, M0213132, R0199376, Y0041829, Y0071847 Show less
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
1 Review
2.0
Filter By Rating:
  • 5 Stars
    0
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    1
  • 1 Star
    0
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
ALESSANDRO DE V - September 12, 2018
  Verified Purchase
price too high!!
Not sure why the price is so high (I needed 2...$5.00 each ) to me they looks like a normal zinc screws. I usually like this company...but this time I feel that there is price gauging.
  • 1
Back to Top
Customer Repair Stories
 Average Repair Rating: 3.8 / 5.0, 5 reviews. What's this?
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
No ignition
First I drilled out the screws on the burner as they were fused. I opened the stove top cover to access the underside of the burner. Removed the orifice holder, by disconnecting the gas line with a line Wrench and the electric cord.

The trick is to be careful with the gas line. Also when you go to replace the orifice holder you will notice that the holes are not threaded. The metal is soft and you're supposed to just screw the screws into the holes and let them bite into the metal. Then you reattach the gas on the electric and put the stove top back together.
Read less
Other Parts Used:
Orifice Holder with Spark Igniter - Right Front Screw
  • RAM from SAN DIEGO, CA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replacing burning assemblies and rusted screws
Installing the 2 new burner assemblies worked great with the new screws. New screws however, did not work with the old burner assemblies that have rusted screws I wanted to replace. New burner assemblies are slightly taller that the old ones.
Other Parts Used:
Screw Dual Burner with Electrode X-Large Burner Head with Electrode
  • Gayle from COUPEVILLE, WA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
7 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door lock wasn't working
There were two parts to the repair - the Dispenser Lid and Bezel was easy - I did it myself.
My wife, who normally would try to do the repair of the door lock herself has been very busy with her condo rental business. It took six weeks to get her to order the parts and then they sat in the box for two weeks before I convinced her to call her appliance repair company she uses for the renatl condos. They did a quality job for only $79.00. When my wife saw what he had to be do to repair the locking mechanism, she was convinced we made the right decision. The Maytag washer is working like new after weeks of manually adjusting the door latch, sometimes a dozen times, before it would lock and do a high speed spin.
Read less
Other Parts Used:
Hinge Pin Short Dispenser Door Retaining Pin Screw Dispenser Lid HOOP- LOCK Door Hoop Ramp Dispenser Bezel SUPPORT- L SPRING- LA
  • Carolyn from Panama City Beach, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
2 of 32 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
fabric softner, and bleach dispenser not working
First off, unplug the machine.
Next remove the existing screws in the plastic dispenser. Then remove the door, there are two screws holding the door on connecting two brackets which need to be lifted to get them to release.
That gives you the access to the remove the front panel, which is done by pulling on the panel itself.
Once that is done you need to remove the two screws that are in the corners upper left, and right that are holding the brackets that hold down the top of the machine. Remove the brackets by gently turning them.
Once done the lid should easily lift up.
The dispenser can then be disconnected by removing the 2 rubber hoses on top and the the larger rubber hose on the bottom along with the electrical connections under the unit. Keep track of which wire goes to which lead.
After removing the dispenser just do everything in reverse.
The machine is like new, and the repair took about 45min and saved me at least $200 dollars.
Read less
Other Parts Used:
Short Dispenser Door Retaining Pin Hinge Pin Dispenser Lid Screw Dispenser Bezel
  • anne from gaston, OR
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
2 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dispenser Bezel broked in two places
I visited several web sites looking for repair parts for my Maytag washing machine. Your site was the easiest to navigate and provided great diagrams and pictures to ensure that I purchased the correct part. I liked the ability to track the delivery of my parts via your web site. I received my parts within a couple days.
Other Parts Used:
Dispenser Bezel Screw
  • Neal from Jefferson City, MO
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Back to Top
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

1 question answered by our experts.
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Larry Provost
January 5, 2018
How to remove burner head to remove glass top
For model number jgd8430ads
PartSelect logo
Hello Larry, Thank you for your inquiry. Remove cooktop from installation position and place on protected surface. Remove screws securing burner base to orifice holder. Lift upward on burner base, disconnect ignitor wire, and remove burner base. Remove main top by lifting off. Hope this helps!

Was this helpful?
Thank you for voting!
  • 1
Back to Top
You May Also Need ?
Large Burner Head
$85.54
$85.54
  In Stock
X-Large Burner Head with Electrode
$81.10
$81.10
  In Stock
Hinge Pin
$10.63
$10.63
  In Stock
Burner Electrode
$41.57
$41.57
  In Stock
Screw, Igniter
$7.84
$7.84
  In Stock
Short Dispenser Door Retaining Pin
$5.82
$5.82
  In Stock
Back to Top
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11742240
Manufacturer Part Number: WP400021-1
Brand
Model Number
Description
Kenmore
10669312310
Refrigerator - REFRIGERATOR
Kenmore
10672002011
Refrigerator - REFRIGERATOR
Kenmore
10672002013
Refrigerator - REFRIGERATOR
Kenmore
10672002015
Refrigerator - REFRIGERATOR
Kenmore
10672003010
Refrigerator - REFRIGERATOR
Kenmore
10672003011
Refrigerator - REFRIGERATOR
Kenmore
10672003012
Refrigerator - REFRIGERATOR
Kenmore
10672003013
Refrigerator - REFRIGERATOR
Kenmore
10672003014
Refrigerator - REFRIGERATOR
Kenmore
10672003016
Refrigerator - REFRIGERATOR
Kenmore
10672003017
Refrigerator - REFRIGERATOR
Kenmore
10672003018
Refrigerator - REFRIGERATOR
Kenmore
10672009010
Refrigerator - REFRIGERATOR
Kenmore
10672009011
Refrigerator - REFRIGERATOR
Kenmore
10672009013
Refrigerator - REFRIGERATOR
Kenmore
10672009015
Refrigerator - REFRIGERATOR
Kenmore
10672013017
Refrigerator - REFRIGERATOR
Kenmore
10678586800
Refrigerator
Admiral
12500048
Ice Maker - Freestanding
Maytag
17694
Refrigerator - REFRIGERATOR
Admiral
17794A
Refrigerator - REFRIGERATOR
Admiral
18103-0
Refrigerator - REFRIGERATOR
Admiral
18103-0A
Refrigerator - REFRIGERATOR
Admiral
181040
Refrigerator - REFRIGERATOR
Admiral
19123-0
Refrigerator - REFRIGERATOR
Admiral
19124-0
Refrigerator - REFRIGERATOR
Admiral
19133-0A
Refrigerator - REFRIGERATOR
Admiral
191340
Refrigerator - REFRIGERATOR
Admiral
191347
Refrigerator - REFRIGERATOR
Admiral
19143-0A
Refrigerator - REFRIGERATOR
Back to Top
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service
Screw
$ 13.25
  In Stock
✖
Stock Status
 In Stock

Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.

If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.

 On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

 Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

 NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.