Gas Valve

PartSelect Number PS2039375

Used with Natural Gas Dryers. This part supplies gas to the dryer.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • No heat or not enough heat.
  • Compare At

    $175.12
  • You Save

    $29.19
  • Your Price

    $145.93
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.1 / 5.0, 4 reviews What's this?
1-4 of 4
 

1 of 2 people found this instruction helpful

Parts Used

  • Gas Valve

Level of DifficultyEasy

Time to do repair:30 - 60 mins

ToolsNutdriver, Wrench set, Wrench(Adjustable)

CustomerWayne from Stevens Point WI

Coil on gas valve was intermittant.

Removed lower front panel. Disconnect two electrical plugs from gas valve. Disconnect gas line from valve. Remove two attachment screws for valve. Remove valve from dryer. Remove inlet fitting from old gas valve and install in replacement valve. Install valve and secure with attachment screws. Put pipe dope on threaded gas valve connection and tighten securely. Re-connect two electrical plugs to valve. Test for proper operation. Install front cover. Now have a dryer that works!

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 3 people found this instruction helpful

Parts Used

  • Gas Valve

Level of DifficultyEasy

Time to do repair:Less than 15 mins

ToolsNutdriver, Wrench set

CustomerMatthew from Anchorage AK

Dryer taking to long to dry clothes

Unplug dryer and turn gas cock knob 90 degrees to shut off gas to dryer. Take off the panel below the the dryer door, by taking out the 2 screws on the bottem of the panel. Locate the gas valve on left side of the dryer. Unplug the 2 electrical connections on the gas valve. Take out the 2 screws on the gas valve bracket. Use 2 wrenches and disconnect gas valve from gas line. Pull out gas valve and attach new gas valve to bracket and reinstall bracket and new gas valve. Replace panel and reinstall screws. All done.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Gas Valve

Level of DifficultyEasy

Time to do repair:Less than 15 mins

ToolsPliers, Screw drivers, Wrench(Adjustable)

Customerthomas from Wayne NJ

Dryer not heating up

-I turned off the gas, unscrewed the gas line from valve, unscrewed 2 screws which held the valve in place, and installed the new one by reversing the procedure---I opted for the basic shipping when I placed my order on Mon. evening-I had new part on Wed. in the am!!!!

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 3 people found this instruction helpful

Parts Used

  • Gas Valve

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsScrew drivers, Wrench set

CustomerSeng from Manitowoc WI

Gas switch was not working properly.Not open

remove the old one and just put the new one in to it and it is woking good

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-4 of 4