4 of 5 people found this instruction helpful
Level of DifficultyA Bit Difficult
Time to do repair:1- 2 hours
ToolsNutdriver, Pliers, Screw drivers, Socket set
CustomerTim from Loomis CA
Washer wouldn't cycle properly and squeaked
The knob and timer were a piece of cake to replace. Amana designed this machine for extremely easy access to the control panel area (i.e. timer)
The belt was the challenge (as should be expected).
The water pump must be removed to replace the belt .
This requires a #25 Torx bit and an awkward position.
I dicided to drop the motor and pump together to gain easier access to the pump mounting screws.
This was definately the key to success.
0 of 1 people found this instruction helpful
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
CustomerBradley from West Olive MI
Pulled the old knob off and replaced with new knob
PartSelect sent me the exact part you can't tell the difference.