Quick Question!

Have you ever purchased from PartSelect.com before?

2038216-1-S-Whirlpool-35-3838-Washer Timer
2038216-1-S-Whirlpool-35-3838-Washer Timer 2038216-2-S-Whirlpool-35-3838-Washer Timer 2038216-3-S-Whirlpool-35-3838-Washer Timer http://www.partselect.com/Schematics/Maytag/41372.gif

Washer Timer

PartSelect Number PS2038216

The timer controls most of the operations of the washer: water level, tub filling and emptying, length of cycles, and cycle setting sequences.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.4 / 5.0, 3 reviews What's this?
1-3 of 3
 

3 of 7 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: More than 2 hours
Tools: Screw drivers, Socket set
Customer: Mark from Alamogordo, NM

13 years of daily use and parts needed replaced

The repair of the four parts, motor, timer, pump and belt only took about 3.5 hours. Simply find the screws or bolts holding the part in place and undo... The place the new part back to match the holes and bolt back down... Match the wiring of the motor by moving one wire at a time. (don't pull the all off at the same time) ... And the price is wonderful... I now have a washer that will last another 10 years or more... Very easy very satisfied.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used:
  • Washer Timer
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Pliers, Screw drivers
Customer: Michael from Orangeburg, NY

Machine wouldn't spin

I removed the sheet metal top to expose the timer switch. I removed the timer,ordered the part and replaced it.Parts select made this repairso easy. I was given a page to describe the problem and was given the answer and part number,Thank you.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 4 people found this instruction helpful

Parts Used:
  • Washer Timer
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver, Screw drivers
Customer: James from bay city, TX

Washing machine would not spin and drain

1.Unplug the washer from the wall outlet.
2. Remove the rear cover to the upper control panel.
3. Remove the timer knob.
4. Remove two screws holding the timer to the panel.
5.Pull the timer out the back.
6.Unplug the pin connector and notice the orientation of the connector
7.Verify the new timer matched the old timer.
8.Plug the pin connector to the new timer.(notice orientation)
9.Place the new timer back in the control panel and install the two screws.
10.Replace the rear cover on the control panel.
11.Reinstall the Timer knob.
12.Plug the washer in to the wall outlet .
13.Cycle the washer without clothes to verify operation.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-3 of 3