2 of 2 people found this instruction helpful
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsNutdriver, Screw drivers
CustomerClarence from Belton TX
Would not go into spin cycle to empty water from tub.
I unpluged the washer from the 120VAC supply, then moved it away from the wall about a foot. I removed the knobs from the washer front control panel. I removed the control panel screws (4) and exposed the timer. I used a nut driver to remove the timer, and unpluged the wiring harness. Replaced the wiring harness, remounted the new timer, and put everything back together. The washer works great. I had replaced the same timer about 10 years ago.