| |
3 of 4 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
Tools
CustomerLester from Elk Grove CA
I had water leaking from the top of the tub.
I opened up the top of the washer which exposed the tub, I took the top ring off the tub and under in side of the ring is the seal. Took the old one out and put the new one in. The old seal was completely wore out.
It was real easy.
Finding the part is usually the hardest part, but thanks to Parts Select finding the part was the easiest part of the repair.
|
4 of 8 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:30 - 60 mins
ToolsPliers, Screw drivers, Socket set, Wrench(Adjustable)
Customerterry from erie PA
Seal leaked
1 I OPENED THE TOP OF THE WASHER FOUND THE TOP PLASTIC RIM PIECE BROKEN DUE TO THE FACT THAT IT CRACKED WHILE UNBALANCED ONE TIME. WHICH MADE IT LEAK WHICH ATE AWAY THE RUBBER SEAL . THE PARTS WERE HERE FAST AND THEY WERE THE RIGHT ONES. GREAT JOB AND I WILL TELL EVERYONE ABOUT YOU THANK YOU VERRY MUCH.
|
3 of 7 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:1- 2 hours
ToolsNutdriver, Screw drivers, Socket set
CustomerSusan from Cloquet MN
During wash cycle, water poured out of bottom of washer
first we looked at schematics on your web site to see what we thought was wrong and if we felt we could do ourselves. It appeared to be seals and gaskets, so we went for it and carefully took the washer apart. We ordered the parts, cleaned the parts we had such as the tub, and were all ready to put back together when the parts arrived. Again, using your pictures, we reasselbled and when we tested, it worked better than it had been in a long time. And we saved a large repair bill!
|