2037923-1-S-Whirlpool-35-2045-Lid Hinge Pin
2037923-1-S-Whirlpool-35-2045-Lid Hinge Pin 2037923-2-S-Whirlpool-35-2045-Lid Hinge Pin http://www.partselect.com/Schematics/Maytag/48353.gif

Lid Hinge Pin

PartSelect Number PS2037923

Sold individually.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Lid or door will not open.
  • Lid or door won’t close.
  • Compare At

    $9.96
  • You Save

    $1.66
  • Your Price

    $8.30
Special Order
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Lid Hinge

Part Number 2037922

This lid hinge in an inch and a half long and is used for some washing machines. It is all white in color and it is made entirely of plastic.

Order within the next 10 hrs and your part ships today!
$4.08
In Stock

Screw

Part Number 2026498

This screw is a metallic screw that is used for many clothes washers.

$4.77
Special Order

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.0 / 5.0, 39 reviews What's this?
1-5 of 39
 

475 of 476 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Allen from North Little Rock, AR

One of the plastic hinge pins brroke

I used a flat screw driver to push in on the releases so I could raise the top of the machine. I then used a torx tool to remove both parts of the hinge, and then used a #2 phillips screw driver, on the new screws I'd also ordered, to re-attach both of the hinge parts. Every thing went just as anticipated.

Help other customers find the most helpful instructions.

Were these instructions helpful?

466 of 469 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Glenda from Covington, LA

Hinges had broken over time

easily found correct parts at good price on parts select, ordered. Received the next day and repairs went smoothly, about 20 min and we were good as new.Saved us a repairman visit. thanks.

Help other customers find the most helpful instructions.

Were these instructions helpful?

31 of 35 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Jon from Ridgecrest, CA

Hinge pin on one side and lid hinge on the other

First I popped the lid up to about 70 degrees. Then removed the two hinges. Then removed and replaced the two hinge pins. The key is to then just start the two screws for the hinges, slip the pins in and then tighten the hinge screws. Total time was 5 minutes.

Help other customers find the most helpful instructions.

Were these instructions helpful?

39 of 60 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 30 - 60 mins
Tools: Nutdriver, Pliers, Screw drivers, Wrench (Adjustable)
Customer: Don from Elma, IA

Dryer would'nt start / drum wouldn't turn

Unplugged Dryer; used screwdriver to push in and release two clips that hold top to front, tilted top back and removed two screws holding front to sides. Disconnected door switch and removed front .
Reached in above motor to remove belt from around pulley and tensioner wheel, Pulled drum and belt out of machine.
Removed approximately 10 screws around perimeter of blower housing and removed cover to access blower wheel. Removed outer lock ring from shaft and clamp from blower wheel hub, and removed blower wheel.
Took out tensioner assembly.
Disconnected wiring connector from motor.
Removed three screws that held blower housing to bottom and removed retainer around rubber motor mount at pulley end of motor. Lifted out motor, blower housing and vent pipe as one unit.
Removed 2nd outer lock ring from motor shaft.
Rotated motor frame 45 degrees to free the rubber mount from the blower housing.
Screwed new pulley onto new motor shaft and cleaned blower housing and vent pipe.
Assembly is reverse of disassembly.
Inspected and lightly greased the glides and inspected the idler wheels before reinstalling drum.

Dryer works perfectly.

Five to ten minutes also spent unscrewing and replacing timer knob and hinge pins on lid of matching washer Crosley cw22b5v.

Very simple repair.

Help other customers find the most helpful instructions.

Were these instructions helpful?

10 of 13 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Edward from Coventry, RI

Cover of washing machine wouldn't stay open, it fell on my wife's hand.

This is a very simple repair, I opened the top of the washer by inserting a screwdriver between the top and the washer cabinet. There are 2 clips on the front of washer, locate and push in to release top. Lift top with lid attached and remove the 2 screws holding the lid to the top of washer. Remove lid and replace hinge pin and hinge.
Replace lid, close top , all done. Total time about 15 minutes or so. Now the lid will stay up and not fall on someone.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-5 of 39