2037922-1-S-Whirlpool-35-2044-Lid Hinge
2037922-1-S-Whirlpool-35-2044-Lid Hinge 2037922-2-S-Whirlpool-35-2044-Lid Hinge 2037922-3-S-Whirlpool-35-2044-Lid Hinge http://www.partselect.com/Schematics/Maytag/Maytag_Thumb/48353.gif

Lid Hinge

PartSelect Number PS2037922

This lid hinge in an inch and a half long and is used for some washing machines. It is all white in color and it is made entirely of plastic.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Lid or door will not open.
  • Lid or door won’t close.
  • Compare At

    $4.86
  • You Save

    $.81
  • Your Price

    $4.05
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Lid Hinge Pin

Part Number 2037923

Sold individually.

$8.14
In Stock

Screw

Part Number 2026498

This screw is a metallic screw that is used for many clothes washers.

$2.70
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.0 / 5.0, 38 reviews What's this?
1-5 of 38
 

472 of 473 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerAllen from North Little Rock, AR

One of the plastic hinge pins brroke

I used a flat screw driver to push in on the releases so I could raise the top of the machine. I then used a torx tool to remove both parts of the hinge, and then used a #2 phillips screw driver, on the new screws I'd also ordered, to re-attach both of the hinge parts. Every thing went just as anticipated.

Help other customers find the most helpful instructions.

Were these instructions helpful?

466 of 469 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerGlenda from Covington, LA

Hinges had broken over time

easily found correct parts at good price on parts select, ordered. Received the next day and repairs went smoothly, about 20 min and we were good as new.Saved us a repairman visit. thanks.

Help other customers find the most helpful instructions.

Were these instructions helpful?

31 of 35 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerJon from Ridgecrest, CA

Hinge pin on one side and lid hinge on the other

First I popped the lid up to about 70 degrees. Then removed the two hinges. Then removed and replaced the two hinge pins. The key is to then just start the two screws for the hinges, slip the pins in and then tighten the hinge screws. Total time was 5 minutes.

Help other customers find the most helpful instructions.

Were these instructions helpful?

9 of 12 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerDaniel from Slatersville, RI

Plastic hinge pin broken on top cover

First push inner tub to left rear, all the way, and
unscrew hinge from inside of tub. repeat same on
right side. lift cover off and unscrew other half of
hinge off cover, both sides.reverse procedures and your done.
Note: always replace both hinge's new while
you have it apart.

Help other customers find the most helpful instructions.

Were these instructions helpful?

9 of 12 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerEdward from Coventry, RI

Cover of washing machine wouldn't stay open, it fell on my wife's hand.

This is a very simple repair, I opened the top of the washer by inserting a screwdriver between the top and the washer cabinet. There are 2 clips on the front of washer, locate and push in to release top. Lift top with lid attached and remove the 2 screws holding the lid to the top of washer. Remove lid and replace hinge pin and hinge.
Replace lid, close top , all done. Total time about 15 minutes or so. Now the lid will stay up and not fall on someone.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-5 of 38