11741776-1-M-Whirlpool-WP34963-Water Inlet Valve
Part Location Diagram of WP34963 Whirlpool Water Inlet Valve
See part 1 in the diagram
11741776-1-S-Whirlpool-WP34963-Water Inlet Valve 360 view
( Grid squares measure 1x1 inch )
11741776-1-S-Whirlpool-WP34963-Water Inlet Valve 11741776-2-S-Whirlpool-WP34963-Water Inlet Valve 11741776-3-S-Whirlpool-WP34963-Water Inlet Valve 11741776-1-S-Whirlpool-WP34963-Water Inlet Valve 360 view
Part Location Diagram of WP34963 Whirlpool Water Inlet Valve
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.com

Water Inlet Valve WP34963

 Fits your LW7503W2!
★★★★★
★★★★★
1 Review

Rated by 6 customers 

Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.

$ 200.16
  In Stock
Get FREE EconoShip on orders over $100! T&C apply

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your LW7503W2!
PartSelect Number PS11741776
Manufacturer Part Number WP34963
Manufactured by Whirlpool
Product Description

Water Inlet Valve Specifications

This valve has two ports for water to enter. This water inlet valve attaches the water lines to the back of your appliance. The attaching solenoids on the valve open and close according to the desired temperature, or amount of water needed.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
No hot or cold water | Leaking
This part works with the following products:
Washer.
This part works with the following products:
Amana, Crosley.
Part# WP34963 replaces these:
AP6008636, 34963
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
1 Review
5.0
Filter By Rating:
  • 5 Stars
    1
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Betty C - September 7, 2018
  Verified Purchase
Part works excellent. Easy Repair.
Part fits like an original OEM part. Works great.
  • 1
Back to Top
Customer Repair Stories
 Average Repair Rating: 4.0 / 5.0, 6 reviews. What's this?
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
A small leak into the tub
1. Removed the hot and cold water hoses. 2. Undid one screw holding on the solenoid mounting plate. 3. Pushed the plate in at the top to unlatch the plate at the bottom. 4. Pulled the plate out and undid the output hose. 5. Replaced the solenoid assembly held on by two screws. 6. Replaced it all in the revers order.
  • Nick from Oceanside, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
2 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Weak cold water flow
First I thought hoses could have been clog, turned out that the flow valve was bad
One screw to take off the value holder itself, removed the two hoses that bring hot and cold water to the valve, removed the water line that brings the cold and hot water to the washer (nothing more than a hose clamp) Was then able to remove the valve holder. Simply unbolted the value from the holder, replaced with new valve and reversed processed to re-install.
Pretty easy, about minutes
Read less
  • Nicholas from Parrish, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Wrench (Adjustable)
11 of 14 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Slow fill on cold cycles.
The repair was easy. It took approximately 30 minutes.
  • Leonard from Glen Allen, VA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers, Wrench (Adjustable)
2 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water continue to drip with machine shut off
Rear panel has to be removed to access part. Removing controls top of machine, two screws lower left and right, will make back panel removal easier. Back panel hangs on 2brackets,protruding thru the panel, near the top, and 3 screws across the bottem. You will also have to remove the drain pass thru connecting the internal drain hose to the external drain hose. The replacement part does not have matching screw mount holes to those on the rear panel. Their is a square punch out with a tab on the replacement which can be used for the top mount screw. Use a drill and bit to round the hole. Mount replacement then drill a hole in the replacement for the the lower mount screw. 1 day service and works like new.
Read less
  • Dennis from Bandera, TX
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers, Wrench (Adjustable)
3 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The washer was taking a long time to fill and would run through multiple cycles
Removed old timer replaced new.
Removed old water inlet and replace with new. I don't think that the water inlet valve had anything wrong with it. But I had one go on me before and thought that It may be the cause of the filling problem. We thought it was taking forever to fill, when actually it was just running through all of the cycles.
Read less
Other Parts Used:
Timer - 4 Cycle Water Inlet Valve
  • George from Grove City, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Screw drivers, Wrench (Adjustable)
5 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The cold water was barely filling the tub of the washer
First I removed 2 screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires. I connected the new value and put it back in place. I then put the screws back in place.

This was very easy and it solved my problem

Thanks a lot
  • Stacey A from Richmond, VA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
2 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Back to Top
Questions and Answers

Be the first to ask our experts a question about this part!

Back to Top
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11741776
Manufacturer Part Number: WP34963
Brand
Model Number
Description
Amana
6492-LWM-251
Washer - WASHER
Amana
6493-LWM-353
Washer - WASHER
Amana
6494-LWM-423
Washer - WASHER
Amana
6495-LWM-433
Washer - WASHER
Amana
6496-LWM-833
Washer - WASHER
Amana
6497-LW-9203
Washer - WASHER
Amana
AWM190W
Washer - Top Loading
Amana
AWM190W2
Washer - Residential, Automatic
Amana
AWM270W
Washer - Top Loading
Amana
AWM270W2
Washer - Residential, Automatic
Amana
AWM290L
Washer - Top Loading
Amana
AWM290L2
Washer - Residential, Automatic
Amana
AWM290W
Washer - Top Loading
Amana
AWM290W2
Washer - Residential, Automatic
Amana
AWM371W2
Washer - Residential, Automatic
Amana
AWM372W
Washer - Top Loading
Amana
AWM372W2
Washer - Residential, Automatic
Amana
AWM373W
Washer - Top Loading
Amana
AWM373W2
Washer - Residential, Automatic
Amana
AWM392L
Washer - Top Loading
Amana
AWM392L2
Washer - Residential, Automatic
Amana
AWM392W
Washer - Top Loading
Amana
AWM392W2
Washer - Residential, Automatic
Amana
AWM393L
Washer - Top Loading
Amana
AWM393L2
Washer - Residential, Automatic
Amana
AWM393W
Washer - Top Loading
Amana
AWM393W2
Washer - Residential, Automatic
Amana
AWM472W
Washer - Top Loading
Amana
AWM472W2
Washer - Residential, Automatic
Amana
AWM473W
Washer - Top Loading
Back to Top
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service
Water Inlet Valve
$ 200.16
  In Stock
✖
Stock Status
 In Stock

Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.

If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.

 On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

 Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

 NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.