| |
6 of 10 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:15 - 30 mins
ToolsScrew drivers
CustomerGordon from Deville LA
Burners and drip pans rusted through
I first had to cut off electrical power to the stove top and then remove a little built up grease around the seams where the parts fit together. I then removed the burner head by twisting about 30 degrees and lifting. I then disconnected the spark ignighter wire, ( a slide on spade). This exposed the two screws that hold the drip pan in place. I had to use a drill to remove the screws on the two front burners because they were so rusty, just a minor problem. I then removed the drip pan. Cleaned a few years of buildup cooking splashes next, then installed new seal tape for gaskets and reversed the process. $250 in parts and 30 minutes work saved buying a $1300 cook top,
|