2037192-1-S-Whirlpool-34001260-Door Lever
2037192-1-S-Whirlpool-34001260-Door Lever 2037192-2-S-Whirlpool-34001260-Door Lever 2037192-3-S-Whirlpool-34001260-Door Lever

Door Lever

PartSelect Number PS2037192

Also known as a door strike.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Lid or door won’t close.
  • Lid or door will not open.
  • Will Not Start.
  • Compare At

    $21.73
  • You Save

    $3.62
  • Your Price

    $18.11
In Stock
Order within the next 1 hr and 21 mins and your part ships today!
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.6 / 5.0, 4 reviews What's this?
1-4 of 4
 

25 of 31 people found this instruction helpful

Parts Used

  • Door Lever

Level of DifficultyVery Difficult

Time to do repair:1- 2 hours

ToolsPliers, Screw drivers

CustomerLeon from North Platte NE

Door latch split

replaced door latch but door would not close had to remove latch assembly and reset the latch in the latch assembly. To reset latch in latch assembly you remove the black plastic only on latch assembly then press the spring down with thumb move the black plastic catch back to the latch position. when you remove the black plastic there is four metal switchs and one spring that you have to pay attention too so remove very carefully.

Help other customers find the most helpful instructions.

Were these instructions helpful?

11 of 20 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerBrenda from Bodega Bay CA

Door hangs down so you have to lift it when closing. Eventually the whole latch mechanism broke.

Pull washer away from wall and find two screws in back next to top edge. Undo and pull top of machine off (lip on fron edge under face cover). reach down and unplug three plugs on door latch small one on top, biggest on bottom. Unscrew the three screw holding the latch on the front of the machine, take out the old and put in the new. Note, I pluged in the plugs before screwing the new one in place, and that might be easier. Put the top back on.
I couldn't find any way to adjust the door, so you still have to lift it up when closing.

Help other customers find the most helpful instructions.

Were these instructions helpful?

5 of 8 people found this instruction helpful

Parts Used

  • Door Lever

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerJody from Lafayette CO

Chewed up door latch

The dog ate the door latch so I ordered a new one. All I had to do was unscrew the old one, remove, and screw in the new one. Super easy. Took longer to find the screwdriver than it did to make the repair.

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 7 people found this instruction helpful

Parts Used

  • Door Lever

Level of DifficultyEasy

Time to do repair:Less than 15 mins

ToolsNutdriver, Screw drivers

CustomerJOHN from LUCK WI

Door lock would not open.

Took off top. Removed front control panel.Removed top screws on front door panel,then I had access to door lock for removal.Had to replace door latch also as this was broken while trying to close door before we noticed the door lock was not working.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-4 of 4