2036415-1-S-Whirlpool-33002793-Burner Tube
2036415-1-S-Whirlpool-33002793-Burner Tube 2036415-2-S-Whirlpool-33002793-Burner Tube 2036415-3-S-Whirlpool-33002793-Burner Tube

Burner Tube

PartSelect Number PS2036415

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • No heat or not enough heat.
  • Compare At

    $64.14
  • You Save

    $10.69
  • Your Price

    $53.45
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.3 / 5.0, 1 reviews What's this?
1-1 of 1
 

12 of 21 people found this instruction helpful

Parts Used

  • Burner Tube

Level of DifficultyEasy

Time to do repair:30 - 60 mins

ToolsSocket set, Wrench(Adjustable)

CustomerClarence from Vienna IL

Dryer wouldn't heat

I removed the front of the dryer by removing the two screws on the bottom of the front panel, disconnected the door switch wires. I removed the connectors from the coils on the gas valve, the heat sensor and the igniter. Loosened the gas line at the valve. I removed the screw holding the gas valve and burner assembly and removed the assembly from the dryer. Remover the screw holding the burner to the valve, and removed the igniter. Replaced the burned and reconnected what I had removed. The reason the burner didn't light was due to the gas deflectors being burned off of the burner, If the igniter, sensor, and coils check out OK , check the front of the burned to besure it is deflecting gas to the igniter

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-1 of 1