| |
2 of 4 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:30 - 60 mins
ToolsNutdriver, Pliers
CustomerTerry from Caruthersville MO
Loud noise inside dryer
After changing all the rollers in the dryer (which didn't fix the problem) I decided to take apart the blower. Sure enough, that was the problem. As the dryer heated up, the damaged wheel would swell and start rubbing the housing. I replaced both and fixed the problem. The repair was pretty easy, since I had taken the dryer apart several times replacing the rollers.
|
20 of 647 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:30 - 60 mins
ToolsNutdriver, Pliers, Screw drivers
CustomerMary Beth from Lake St. Louis MO
Blower wheel broke
Replaced bower wheel, drum rollers,belt and Idler pulley while the dryer was apart. so far so good. Easy repair Motor bearings seemed tight so hopefully will get another ten years out of dryer.
|