2035589-1-S-Whirlpool-33001762-Thermal Fuse - L183
2035589-1-S-Whirlpool-33001762-Thermal Fuse - L183 2035589-2-S-Whirlpool-33001762-Thermal Fuse - L183 2035589-3-S-Whirlpool-33001762-Thermal Fuse - L183

Thermal Fuse - L183

PartSelect Number PS2035589

This thermal fuse mounts on your dryer's blower wheel housing. It will cut out once your dryer's internal temperature reaches around 183 degrees Fahrenheit, and will not cut in again. Like a house fuse, you will have to replace it when it blows.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • No heat or not enough heat.
  • Will Not Start.
  • Compare At

    $25.97
  • You Save

    $4.33
  • Your Price

    $21.64
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.5 / 5.0, 4 reviews What's this?
1-4 of 4
 

85 of 111 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsNutdriver

CustomerAndrew from Goldsboro NC

Unit would not come on due to blown fuse

Remove 2 front door screws and 2 side cover screws .
Remove front cover replace switches and fuses.
De- lint the blower and vent duct.
Reinstall cover door finished.

Help other customers find the most helpful instructions.

Were these instructions helpful?

9 of 11 people found this instruction helpful

Parts Used

  • Thermal Fuse - L183

Level of DifficultyEasy

Time to do repair:Less than 15 mins

ToolsPliers, Screw drivers

CustomerSALLY from ANAHEIM CA

Dryer wouldn't start

We tried replacing the door switch first, still didn't start. Next we tried the thermal fuse and it turned on and has worked ever since.

Help other customers find the most helpful instructions.

Were these instructions helpful?

6 of 9 people found this instruction helpful

Parts Used

Level of DifficultyA Bit Difficult

Time to do repair:1- 2 hours

ToolsScrew drivers, Socket set

CustomerKathy from Lilburn GA

Dryer wasn't heating sufficiently/consistently.

Removed front cover, removed old heating unit, installed new thermostat,heating coil inside the dryer and finally replaced the fuse in the front. The main complication was reaching the screws for the heating coil, not really complex.

Help other customers find the most helpful instructions.

Were these instructions helpful?

7 of 12 people found this instruction helpful

Parts Used

  • Thermal Fuse - L183

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsSocket set

Customermatthew from Central Islip NY

No heat, coil wasnt getting hot

took old one out then i had to strip the connector off new one was to big...

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-4 of 4