Torsion Timer

PartSelect Number PS2035316

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

  • Compare At

    $203.59
  • You Save

    $33.93
  • Your Price

    $169.66
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.4 / 5.0, 4 reviews What's this?
1-4 of 4
 

6 of 7 people found this instruction helpful

Parts Used

  • Torsion Timer

Level of DifficultyEasy

Time to do repair:Less than 15 mins

ToolsNutdriver

CustomerJames from Williamston MI

Timer had quit advanceing but was on so tenants had free use.

took cover off with key and removed one quarter inch screw and then pulled timer up and out. After verifying it was correct timer moved wires to new timer one at a time and reassembled and it now works fine.

Help other customers find the most helpful instructions.

Were these instructions helpful?

5 of 8 people found this instruction helpful

Parts Used

  • Torsion Timer

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsNutdriver, Screw drivers

CustomerRon from enon Valley PA

Broken timer on coin-op dryer

After having an Appliance repairman spend 1.5 hours trying to fix the machine I sent him away and told him I wouldn't pay more than .5 hours labor as he clearly didn't know what he was doing. He didn't have a schematic and I believe he actually made the problem worse.
Using the part blowup on partselect I was able to identify the part needed and purchase it in a few minutes.
In the future, I will diagnose and try to fix this type of problem myself instead of wasting the time and money with "repair" experts...

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 6 people found this instruction helpful

Parts Used

  • Torsion Timer

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsNutdriver

CustomerTodd from Chagrin Falls OH

Drying time was messing up (too short)

After seeing how much it would cost to have a maytag guy come out & do it, I decided to look it up on this site & found it was reported to be an easy fix. It was very easy, just made sure the same connectors went into the same slots & switched them out (1 nut to remove & replace).

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 3 people found this instruction helpful

Parts Used

  • Torsion Timer

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsNutdriver

CustomerKenneth from Higginsville MO

Had to replace broken timer

First removed the screw that held the timer in place. Then removed the wires, placed wires on new timer and replaced timer in proper place, replaced screw. Thanks Ken

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-4 of 4