2035152-1-S-Whirlpool-33001003-Lint Filter
2035152-1-S-Whirlpool-33001003-Lint Filter

Lint Filter

PartSelect Number PS2035152

This white lint filter is a slide-in style type of screen. This filter collects lint as it passes through the dryer vent. Please NOTE: You must be able to read the words "Clean Before Loading". If you cannot read the words, then it will not fit your appliance.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Takes too long to dry.
  • No heat or not enough heat.
  • Unusual Noise.
  • Compare At

    $21.20
  • You Save

    $3.53
  • Your Price

    $17.67
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.3 / 5.0, 60 reviews What's this?
46-60 of 60
 

0 of 1 people found this instruction helpful

Parts Used

  • Lint Filter

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerGIL from BLOOMSBURG PA

1975 vintage coin op dryer

REMOVED OLD FILTERS ON 1975 COIN OP MAYTAG DRYER AND REPLACED WITH THE NEW ONES. SIMPLE REPAIR (ALREADY CLEANED THE 4 DRYERS, THAT PART TOOK ABOUT 4 TOTAL HOURS. TOOLS REQD; 1/4 NUT DRIVER PHILLIPS DRIVER) REMINDER TO EVERYONE TURN OFF THE POWER BEFORE SERVICING ANY APPLIANCE!

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Lint Filter

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerGIL from BLOOMSBURG PA

Old coin dryer filters broken

REMOVED OLD FILTER AND PUT NEW ONE IN X 4

NO TOOLS REQUIRED TO REPLACE FILTERS IN 4 COIN OP DRYERS.

THANK YOU

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Lint Filter

Level of DifficultyReally easy

Time to do repair:30 - 60 mins

ToolsNutdriver, Screw drivers, Wrench(Adjustable)

CustomerJohn from San Antonio TX

Clothes damp when cycle finished.

1. Thought I had a clogged duct or vent so I changed the duct. No clog, Problem continued. 2. Checked the heating element for damage, none noted. Quite a lot of lint under the dryer drum where the element was located so I cleaned the area. 3. Decided to replace the sensor that detects the dryness of the clothing, and while waiting for the part I was told by a friend to clean lint from the upper limit sensor mounted in the housing of the heating element. Cleaned upper limit sensor and replaced dryness sensor at the same time. Problem resolved. 4. Replaced Lint Filter to try and prevent lint build up.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Lint Filter

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerKathleen from Albany OR

I had a hole in the lint filter.

I took out the old one and slipped in the new one. I was glad to know that it was so easy to find the piece I needed replaced. It was inexpensive and it came quickly.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Lint Filter

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

Customersusan from Boston MA

Old lint filter broke

just took the broken filter out and replaced it with the new one. perfect fit. it was not easy to find the replacement part, given the age of the dryer (15 yrs) but Part Select had it in stock and shipped it right away. Great service. will use again

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:30 - 60 mins

ToolsPliers, Screw drivers, Socket set

CustomerTod from Mantua OH

Age. Age, and a bazillion loads of laundry.

Remove the two bottom screws that hold the front sheet metal on. Pull the bottom of the front out, while it pivots at the top -- it will drop free. Disconnect the two wires at the door closed switch. Put the front panel aside. Remove the four screws that hold the front drum retainer in place. Use a Dremel, or other suitable tool to remove the old rivets from the glides. Remove all of the old guide pieces. Install new, and use rivet tool to pop-rivet new guides in place. Re-assembly is the reverse of dis-assembly. The lint screen is a given. ;)

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Lint Filter

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerRoger from Graysville OH

Lint filter was broken

Replaced with new perfect match for old.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Lint Filter

Level of DifficultyReally easy

Time to do repair:30 - 60 mins

Tools

CustomerGeorge from Weare NH

Lint screen worn out -- starting to tear

I removed the old lint filter and repaced it with the new one.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Lint Filter

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerClifford from Bethpage NY

Lint filter was torn

Found part no. on-line. Ordered part on line as it was less expensive with the shipping than the price at the local parts store.Came in two days with regular shipping. Just slid the old out and the new in.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Lint Filter

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerPaul from Granada Hills CA

Replaced torn lint screen filter

Just slid the new one in the old ones slot. No
repair needed, just a replacement part.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Lint Filter

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

Customerbill from grove city OH

Needed a new lint filter

Repair of course was simple, but very impressed by the speedy delivery. Filter fit perfectly and great price. Thank you partselect.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Lint Filter

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerNelson from Oroville CA

Lint filter screen torn

lifted out old filter and dropped in the new one - perfect fit. Happy camper!!

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:30 - 60 mins

ToolsScrew drivers, Socket set

CustomerJohn from Cleveland OH

Lint screen was torn and the dryer belt was broken

The belt was easy. I took the two screws off the bottom of the front panel. loosened the screws that held the front of the drum in place. Slipped the belt over the drum, fed it around the pulley from the rear access panel. DONE!! My parts arrived within two days. Everything went smooth. I'll be back for any and all future repair needs. THANKS!!

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 2 people found this instruction helpful

Parts Used

  • Lint Filter

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerBill from Madison MS

Appearently the maid tossed the lint filter in the garbage by mistake.

Ordered a new filter, it came in 2 days, I put it in the dryer an cranked it up!!

Help other customers find the most helpful instructions.

Were these instructions helpful?

19 of 617 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerChristine from Kingsford MI

Holes in lint filter

first i removed old filter, put into plastic bag. Removed new filter, and slipped into dryer. This dryer is old, but works great, and now will work even better because she has a new filter.

Help other customers find the most helpful instructions.

Were these instructions helpful?

46-60 of 60