Quick Question!

Have you ever purchased from PartSelect.com before?

2034431-1-S-Whirlpool-32020101-Spark Ignition Module with Bracket
2034431-1-S-Whirlpool-32020101-Spark Ignition Module with Bracket 2034431-2-S-Whirlpool-32020101-Spark Ignition Module with Bracket 2034431-3-S-Whirlpool-32020101-Spark Ignition Module with Bracket http://www.partselect.com/Schematics/Maytag/30166.gif

Spark Ignition Module with Bracket

PartSelect Number PS2034431

This spark ignition module lights the gas that starts the burner on your range or cooktop. This electrode is part of the burner assembly, sits next to the burner head, and is just over an inch in length. It pulls current from the ignition circuit; the more current it pulls, the warmer it gets. When the spark ignition module reaches a certain temperature, it creates a spark. This spark ignition module comes with the mounting bracket you will need to successfully install the part. Before installing your new part, ensure that the gas supply and power is disconnected from your range. This part cannot be repaired. If it is damaged or faulty, it must be replaced.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Will Not Start.
  • Gas igniter glows, but will not light.
  • Element will not heat.

Compare At

$74.47

You Save

$12.41

Your Price

$62.06
Order within the next 3 hrs and your part ships today!
Get this part fast. Average delivery time via standard shipping: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.9 / 5.0, 16 reviews What's this?
16-16 of 16
 

1 of 2 people found this instruction helpful

Parts Used:
  • Spark Ignition Module with Bracket
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Pliers, Screw drivers
Customer: Dale from Monmouth Junction, NJ

All four spark did not ignite or only once and a while

Unplugged the stove, removed all 4 burner discs from the stove top (2 screws each- WATCH YOU DONT STRIP HEADS) and disconnecting electrode wires ( DONT HAVE TO- IF YOU HAVE ENOUGH ROOM TO SIDE TOP UNIT OVER), unscrewed the old module, removed each of the 6 wires,one at a time and connected wires to the new module. Plug in stove to test before you screwed it into place, reinstalled the top unit , put the stove top in place,. Done!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

16-16 of 16