2033785-1-S-Whirlpool-31864501-Electronic Oven Control Board
2033785-1-S-Whirlpool-31864501-Electronic Oven Control Board 2033785-2-S-Whirlpool-31864501-Electronic Oven Control Board 2033785-3-S-Whirlpool-31864501-Electronic Oven Control Board

Electronic Oven Control Board

PartSelect Number PS2033785

Manufacturer Part Number 31864501
Manufactured by Whirlpool

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

  • Compare At

    $292.55
  • You Save

    $48.76
  • Your Price

    $243.79
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.1 / 5.0, 4 reviews What's this?
1-4 of 4
 

3 of 4 people found this instruction helpful

Parts Used

  • Electronic Oven Control Board

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsNutdriver, Pliers

CustomerKermit from Bigfork MT

Dial to control oven temperature malfunctioning

The most difficult part of the job was diagnosing the problem. Since "off" was full heating and "clean" turned the oven off, I guessed it must be the control. I ordered the part. When I recieved it, I slid the oven out. I unplugged the oven. Then I removed the back panel with eight sheet metal screw. I then could see that the control unit matche the part I received. With four sheet metal screws the control was removed. Then I moved the wire connections from the old part to the new part one by one, then screwed the new part in. I put the cover back on, plugged the oven back in, slid it back into place and turned on the oven. Everything worked.

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 4 people found this instruction helpful

Parts Used

  • Electronic Oven Control Board

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsNutdriver, Screw drivers

CustomerRalf from Sandusky MI

Fast and easy

First I removed the back panel (6 screws) you can clearly see the part ,removed 4 screws that hold the clock unit in place.disconnected the wires.removed the plastic film on the old part,cleaned it,stuck it back on the new one.reconnect 5 wires.done.part was shipped very quick and i saved about 100$

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 5 people found this instruction helpful

Parts Used

  • Electronic Oven Control Board

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsNutdriver, Screw drivers

CustomerJerry from Ontario NY

Oven controls would not work. Display read fff

I removed the back of the control panel and the disconnected the control circuit board. There wires and one plug and the new board was in. The most difficult part was removing the stick on display label without tearing it. In 20 minutes we used it for dinner. Parts came very quickly and the repair was simple. Thanks

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

  • Electronic Oven Control Board

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsNutdriver

Customerlance from loranger LA

An unexplained failure of the unit, the main pcb/ controller

After a standard trouble shoot, and finding the control PCB has the correct line voltage and the unit failure has more than one function failure with-in the unit operation, I replaced the Control PCB.
Removal and install took about 10 min, and the unit works fine, all automation is working properly.
Lance

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-4 of 4