MODULE- SP

PartSelect Number PS2033660

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.1 / 5.0, 2 reviews What's this?
1-2 of 2
 

1 of 2 people found this instruction helpful

Parts Used

  • MODULE- SP

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsPliers, Screw drivers

CustomerGary from Shelton WA

One day all the burners just started sparking without being turned on.

Pulled the power cord, and of course it stopped sparking. Removed the protection cover, I then removed the upper and lower screws with a screw driver. Pulled the module out so I could work. I removed the leads one for one with the new module just to made sure I did mix them up, and replaced the screws on the new module, but found that there were two clips on the setting surface of the new part that needed to be clipped off with side cutters in order to set flush. completed the installation of module and protection cover.
It beats a service call. GB

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 3 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerDick from Casper WY

Would not light

Just remove screws holding top of range, these screws are located at each top burner. Remove gas knobs for each burner and oven. Then remove screws holding burner knobs in place. Before work is to be done turn off both electrical and gas to stove.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-2 of 2