2032638-1-S-Whirlpool-315843B-Back Guard End Cap - Left Side
2032638-1-S-Whirlpool-315843B-Back Guard End Cap - Left Side 2032638-2-S-Whirlpool-315843B-Back Guard End Cap - Left Side 2032638-3-S-Whirlpool-315843B-Back Guard End Cap - Left Side

Back Guard End Cap - Left Side

PartSelect Number PS2032638

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

  • Compare At

    $33.49
  • You Save

    $5.58
  • Your Price

    $27.91
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Back Guard End Cap - Right Side

Part Number 2032632

n/a

$31.27
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.4 / 5.0, 3 reviews What's this?
1-3 of 3
 

5 of 7 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsPliers, Screw drivers

CustomerJeffrey from Prattville AL

Broil function was not working.

Unplugged oven. Took screws off top backside cover. Pulled off oven knob. Pulled wies off backside of krc electric module, Making sure to remember the order of the wires. Took off four screws on the module and pulled it out. Pulled off the touch pad plastic from the old module. Put old touch pad plastic on new module. Replaced new module with the four screws. pushed wires back on. Also, replaced left side back guard end cap, by unscrewing the three screws that hold it. I then replaced top backside cover. pushed back on oven control knob. Plugged oven in and tested it. Now its as good as new.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

  • Back Guard End Cap - Left Side

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerWARD from WELLESLEY MA

Broken end cap held by two screws

Unscrewed the old and screwed on the new.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

  • Back Guard End Cap - Left Side

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerMichael from Baltimore MD

Something got pushed into the control panel and the end cap cracked at the screw locations.

First I removed the three screws, then removed the old end cap, cleaned the area, and reinstalled the new end cap, then attached with the three screws.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-3 of 3