| |
1 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
ToolsScrew drivers
CustomerJames from Des Moines IA
Old caps were cracked, and discolered
1. removed the screws that held the caps. 2. Moved the stove away from the wall. 3. Unplugged the power cord, for safety. 4. Removed the caps. 5. Install the new caps. 6. Plug the power cord in. 7. Place stove back in positon against the wall.
|
1 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsNutdriver, Screw drivers
CustomerDavid from Hinckley OH
Broken parts
Simple repair procedure: pried out broken switch and pulled wires off then reversed this procedure, removed screws from broken end caps and replaced same. Parts were easy to order as there was an exploded view. This made picking out the parts required. There is two switches on the front of the stove and with out part numbers or a service manual the exploded views made this choice easy.
|