Quick Question!

Have you ever purchased from PartSelect.com before?

2031922-1-S-Whirlpool-31239-Quick Connect Timer - 3 Cycle
2031922-1-S-Whirlpool-31239-Quick Connect Timer - 3 Cycle 2031922-2-S-Whirlpool-31239-Quick Connect Timer - 3 Cycle 2031922-3-S-Whirlpool-31239-Quick Connect Timer - 3 Cycle http://www.partselect.com/Schematics/Maytag/17838.gif

Quick Connect Timer - 3 Cycle

PartSelect Number PS2031922

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Timer will not advance.

Compare At

$145.20

You Save

$24.20

Your Price

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.2 / 5.0, 7 reviews What's this?
1-7 of 7
 

13 of 16 people found this instruction helpful

Parts Used:
  • Quick Connect Timer - 3 Cycle
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver, Screw drivers
Customer: Gary from Haverhill, NH

Timer knob wouldn"t turn timer

I removed the six screws that held the control panel to the washing machine and then tried to unscrew the timer knob counter-clockwise to remove it,but it turned freely and wouldn"t unscrew as it should because it was broken inside. I laid the control panel down and used a hammer and a punch and with a few good taps on the metal shaft that was on the inside of the timer (hitting back towards the timer knob) it let go and then the knob turned off easily. I then slid the timer knob plate off the shaft. I removed the two 1/4" nut screws from the timer unit with a nut driver. Next I unplugged the electrical plug by lifting the tab on the top and pulled the connection apart. I put the new timer in with the two nut screwsand plugged in the electrical connection. I then slid on the timer knob plate and screwed the knob on. The control panel was put back on with the six screws and the machine worked perfect. Something that you must not forget......unplug all appliances before working on them.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

4 of 6 people found this instruction helpful

Parts Used:
  • Quick Connect Timer - 3 Cycle
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Irene from Decatur, TN

Timer would not advance.

Took the plate off the back of the timer. Unscrewed two screws from the timer, then removed the plastic knob in front of the washer and removed the electrical plug from the timer. Then just reversed the process to install the new timer.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

3 of 6 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 30 - 60 mins
Tools: Nutdriver, Screw drivers
Customer: Nicholas from Saint Augustine, FL

Knob broke off and timer was stripped

removed all old parts, put in new, saved a bundle

Help other customers find the most helpful instructions.

Were these instructions helpful?   

3 of 6 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers, Socket set
Customer: Benny from Upland, CA

Timer knob on the washer was stripped.

Replaced the timer and knob. Very simple..!! Works great now... dont have to struggle turning the washer knob anymore.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 1 people found this instruction helpful

Parts Used:
  • Quick Connect Timer - 3 Cycle
Level of Difficulty: Easy
Time to do repair: Less than 15 mins
Tools: Nutdriver, Screw drivers
Customer: Rebecca from Lynchburg, VA

Timer went out.

Removed the cover on the washer controls. Loosed the knob and popped it off. Then disconnected the plug and replaced with the new part. Put th ekonb back on and closed it all up. It was pretty easy. Took longer to reomove all the screws than it did to remove and replace the part.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 2 people found this instruction helpful

Parts Used:
  • Quick Connect Timer - 3 Cycle
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers, Socket set
Customer: theo from flemington, NJ

Timer was not engage to turn washer on to wash sycle

Took the timer nub off by unscrewing then the cover housing the timer unit . 6 Screws . 3 In front 3 in back . Cover came off easy. Un plug the power. Disconect old timer and replace with the new . Plug comes off easy by gently puling it out . Put back cover put back timer nub plug the power on and there it was back as new.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 30 - 60 mins
Tools: Nutdriver
Customer: Neva from Houston, TX

The hose was old and dry and the timer was having problems

My husband was the one who installed the parts but which gave him more problems was the hose.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-7 of 7